...
首页> 外文期刊>Tissue engineering, Part C. Methods >Deposition of electrospun fibers on reactive substrates for in vitro investigations.
【24h】

Deposition of electrospun fibers on reactive substrates for in vitro investigations.

机译:将电纺纤维沉积在反应性基材上以进行体外研究。

获取原文
获取原文并翻译 | 示例
           

摘要

Recent in vitro studies with electrospun nanofibers have used a range of techniques. The in vitro system presented in this article describes electrospun fibers deposited onto chemically reactive substrates to provide fiber adherence and surface chemistry control of the substrate. Fibers of poly(epsilon-caprolactone) (PCL) or of a blend of PCL and collagen type I (C/PCL) were electrospun directly onto collectors coated with isocyanate-terminated star (polyethylene glycol) (sPEG). Alternatively, parallel electrospun fibers were collected on dual collectors in "dilute" quantities and transferred onto sPEG-coated substrates. The initial reactive nature of the substrates allows the collection of very few fibers, which adhere well during frequent washes. Furthermore, the sPEG layer transforms into protein-repellent substrates with the additional potential to include specific cellular mediators such as glycine-arginine-glycine-aspartate-serine (GRGDS) peptides to promote cell adhesion. Therefore, the fiber and substrate chemistry can be modified independently, which is particularly useful for in vitro studies of guided migrating cells. In the present work, dissociated cells of dorsal root ganglia seeded onto the substrates were investigated to assess the influence of different combinations of fiber material, fiber orientation, and surface functionalization. Cell adhesion was observed predominantly on the nanofibers, except when the sPEG layer on the substrate contained GRGDS. On the cell-repellent sPEG substrates, neurites were aligned in direct contact with parallel C/PCL fibers and less so with PCL fibers. In contrast, neurite alignment showed less guidance effect with C/PCL electrospun fibers on the GRGDS/sPEG-coated substrates. Therefore, the combination of oriented biologically active fibers on cell-repellent surfaces enhanced the guidance of such cells. These reactive substrate systems provide a multitude of in vitro combinations for providing cells with specific mediators and, in turn, defining the optimum environment of regenerating devices for in vivo studies.
机译:最近对电纺纳米纤维的体外研究已使用了多种技术。本文介绍的体外系统描述了沉积在化学反应性基材上的电纺纤维,以提供对基材的纤维粘附性和表面化学控制。将聚(ε-己内酯)(PCL)或PCL和I型胶原的混合物(C / PCL)的纤维直接电纺到涂有异氰酸酯封端的星形(聚乙二醇)(sPEG)的收集器上。或者,将平行的电纺纤维以“稀”量收集在双收集器上,并转移到sPEG包被的底物上。基材的初始反应性允许收集极少的纤维,这些纤维在频繁清洗时会很好地粘合。此外,sPEG层转化为具有蛋白质排斥作用的底物,具有潜在的额外潜力,可包括特定的细胞介体,例如甘氨酸-精氨酸-甘氨酸-天冬氨酸-丝氨酸(GRGDS)肽,以促进细胞粘附。因此,纤维和底物的化学性质可以独立地修改,这对于引导性迁移细胞的体外研究特别有用。在目前的工作中,研究了接种在基质上的背根神经节的解离细胞,以评估纤维材料,纤维取向和表面功能化的不同组合的影响。除了当基材上的sPEG层包含GRGDS时,主要在纳米纤维上观察到细胞粘附。在具有排斥细胞作用的sPEG基质上,神经突与平行C / PCL纤维直接接触排列,而与PCL纤维则较少。相比之下,在GRGDS / sPEG涂覆的基底上,C / PCL电纺纤维对神经突排列的引导作用较小。因此,在细胞排斥表面上定向的生物活性纤维的结合增强了这种细胞的引导。这些反应性底物系统提供了多种体外组合,可为细胞提供特定的介体,进而为体内研究确定再生装置的最佳环境。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号