...
首页> 外文期刊>Theoretical and Applied Fracture Mechanics >Impact toughness of 12Cr1MoV steel. Part 2-Influence of high intensity ion beam irradiation on energy and deformation parameters and mechanisms of fracture
【24h】

Impact toughness of 12Cr1MoV steel. Part 2-Influence of high intensity ion beam irradiation on energy and deformation parameters and mechanisms of fracture

机译:12Cr1MoV钢的冲击韧性。第2部分-高强度离子束辐照对能量和变形参数及断裂机理的影响

获取原文
获取原文并翻译 | 示例

摘要

The impact toughness of initial and irradiated 12Cr1MoV steel Charpy specimens has been studied in the range of temperatures from 20 degrees C to 600 degrees C. In addition, it was found that ion beam treatment of steel deteriorates the impact toughness at the tested temperatures by 5-42%. Moreover, it was revealed that the increase of testing temperature decreases the difference between the fracture energies of initial and modified steel specimens. Also, the physical regularities of irradiation effect on microhardness and hardness of the treated surface were investigated. It was also revealed that irradiated specimens fracture via more brittle mechanism, which is related to both more severe stress-strain state at the notch tip and gradient alteration of properties in the subsurface layer. (C) 2015 Elsevier Ltd. All rights reserved.
机译:在20摄氏度至600摄氏度的温度范围内研究了初始和辐照12Cr1MoV钢夏比试样的冲击韧性。此外,发现离子束处理钢在测试温度下会使冲击韧性降低5倍。 -42%。此外,揭示了测试温度的升高减小了初始和改性钢样品的断裂能之间的差异。而且,研究了辐照作用对处理后的表面的显微硬度和硬度的物理规律。还发现,辐照后的试样通过更脆的机制断裂,这与切口尖端处更严重的应力应变状态和地下层的性质梯度变化有关。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号