Experimental study of the combined influence of the tool geometry parameters on the cutting forces and tool vibrations

摘要

The aim of the experimental investigations was to select the optimal proposed cutting tool geometry by studying the effects of the tool angles (tool back rake angle (gamma (p) )) and the cutting edge angles (the tool cutting edge angle of the major cutting edge (kappa (r) ) and cutting edge inclination angle (lambda (s) )) and there interrelations, which produces less-generated cutting forces, less tool vibrations, and improved machined surface roughness for turning operations. Different cutting tool geometries were designed according to the main tool angles and manufactured with a high speed steel material (HSS) type-T15 with a high tungsten alloy grade. Based on measured cutting force components, tool vibrations, and surface roughness, it can be concluded that when the gamma (p) angle ranges from a negative value (gamma (p) = -5A degrees) to a positive value (gamma (p) = 0A degrees and gamma (p) = 5A degrees), the average cutting force components decreased, especially tangential force component (Fz) that was more remarkable, and tool vibrations reduced; this decreasing trend improved surface roughness. The effects of the variation of the kappa (r) angle and the positive lambda (s) angle were observed on the variation of the axial and radial force component, whereas the tangential force remained constant. Lowering kappa (r) decreased the surface roughness, while the lambda (s) angle increased, a small variation was observed. As a conclusion, the good optimized cutting tool geometries were classified as follows: the first was cutting tool geometry having a neutral angle (gamma (p) = 0A degrees), the second was with gamma (p) = +5A degrees, and then the third was with gamma (p) = -5A degrees. Thereafter, the fourth tool geometry was having lambda (s) = 3A degrees and the last was for geometry having kappa (r) = 75A degrees.