...
首页> 外文期刊>Progress in Organic Coatings: An International Review Journal >Study of the anticorrosive behaviour of epoxy binders containing non-toxic inorganic corrosion inhibitor pigments
【24h】

Study of the anticorrosive behaviour of epoxy binders containing non-toxic inorganic corrosion inhibitor pigments

机译:含无毒无机腐蚀抑制剂颜料的环氧粘结剂的防腐性能研究

获取原文
获取原文并翻译 | 示例
           

摘要

The anticorrosive performance of epoxy coatings pigmented with non-toxic corrosion inhibitors pigments was investigated in this work. The coatings used contained the following pigments: zinc phosphate (ZP), zinc phosphomolybdate (ZPM) and zinc calcium phosphomolybdate (ZCPM). For comparative studies epoxy coatings with the following compositions were made up: one only with filler (CRG); one without pigments, varnish (VR) and other with zinc chromate (ZC) pigment. The corrosion inhibitor performance of the coatings was evaluated by immersion tests in 0.01 mol L-1 NaCl aqueous solutions and accelerated tests in a salt spray chamber. The corrosion inhibitor performance of the samples was monitored using open-circuit potential (E-oc) measurements and electrochemical impedance spectroscopy (EIS) technique. Complementary tests were carried out using water vapour permeability of free-standing films and thermogravimetric (TG) analysis. The permeability test showed that the addition of the studied pigments did not modify the barrier properties of the free-films in comparison that pigmented with chromate. Thermal analysis indicated that the addition of the pigments improved the thermal stability of the coatings and it suggested a resin/pigment interaction. The total immersion tests and salt spray tests demonstrated that the barrier properties of the coatings pigmented with the inhibitors were not degrading as much as that pigmented with ZC. Therefore, all the three pigments could replace ZC as an anticorrosive pigment in similar conditions to those described here. The best corrosion inhibitor performance in the total immersion test was presented by the ZPM and ZCPM coatings while in the salt spray test the corrosion inhibitor performance of all the three pigmented coatings was similar, suggesting that only in the less aggressive test is possible to detect any difference between the coatings with the non-toxic pigments. (C) 2008 Elsevier B.V. All rights reserved.
机译:在这项工作中研究了用无毒腐蚀抑制剂颜料着色的环氧涂料的防腐性能。所使用的涂料包含以下颜料:磷酸锌(ZP),磷钼酸锌(ZPM)和磷钼酸锌锌(ZCPM)。为了进行比较研究,组成了具有以下成分的环氧涂料:一种仅含填料(CRG);另一种仅含填料。一种不含颜料,清漆(VR),另一种不含铬酸锌(ZC)颜料。通过在0.01 mol L-1 NaCl水溶液中的浸入试验和在盐雾室中的加速试验来评估涂层的缓蚀剂性能。使用开路电势(E-oc)测量和电化学阻抗谱(EIS)技术监控样品的缓蚀剂性能。使用独立膜的水蒸气渗透率和热重(TG)分析进行补充测试。渗透性测试表明,与用铬酸盐着色的颜料相比,添加所研究的颜料不会改变自由膜的阻隔性能。热分析表明,颜料的添加改善了涂层的热稳定性,并表明了树脂/颜料的相互作用。总的浸没测试和盐雾测试表明,用抑制剂着色的涂料的阻隔性能不会像用ZC着色的涂料那样降低。因此,在与此处所述相似的条件下,所有三种颜料都可以代替ZC作为防腐颜料。 ZPM和ZCPM涂层在总浸没测试中表现出最佳的缓蚀性能,而盐雾试验中,所有三种着色涂层的缓蚀性能均相似,这表明只有在较弱的试验中才能检测到任何无毒颜料涂层之间的差异。 (C)2008 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号