首页> 外文期刊>Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems >Mechanochemical polymerization of methyl methacrylate initiated by the grinding of quartz in an n-heptane solvent
【24h】

Mechanochemical polymerization of methyl methacrylate initiated by the grinding of quartz in an n-heptane solvent

机译:通过在正庚烷溶剂中研磨石英引发的甲基丙烯酸甲酯的机械化学聚合

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The information on mechanoradicals produced by grinding quartz in an n-heptane solvent was examined by means of electron spin resonance spectroscopy (ESR). The wet grinding of quartz was carried out by using a vibrating ball mill with a laboratory scale. The data of the ESR measurement revealed that E' center radicals (≡Si·) primarily produced from ground quartz in an n-heptane solvent and that the concentration of the mechanoradicals was approximately proportional to the specific surface area of ground quartz. The polymerization of methyl methacrylate (MMA) mechanochemically initiated by the grinding of quartz in the mixture solvent of n-heptane and MMA was also attempted by using the vibrating ball mill. The effect of the concentration of MMA monomer on the polymerization was investigated. As a result the existence of the induction period to be observed well in radical polymerization was confirmed in all of the concentrations of MMA. It was found that the conversion of MMA increased with the decrease of MMA monomer and that the largest polymer yield was obtained at the concentration where the amount of monomer and solvent was the same in volume.
机译:通过电子自旋共振光谱法(ESR)检验了在正庚烷溶剂中研磨石英所产生的机械力学信息。石英的湿磨是通过使用实验室规模的振动球磨机进行的。 ESR测量的数据表明,E'中心自由基(≡Si·)主要是由正庚烷溶剂中的研磨石英产生的,机械成分的浓度大致与研磨石英的比表面积成正比。还通过使用振动球磨机尝试了通过在正庚烷和MMA的混合溶剂中研磨石英而机械化学引发的甲基丙烯酸甲酯(MMA)的聚合。研究了MMA单体浓度对聚合的影响。结果证实了在所有MMA浓度下自由基聚合中都可以很好地观察到的诱导期的存在。发现随着MMA单体的减少,MMA的转化率增加,并且在单体和溶剂的量相同的浓度下获得最大的聚合物产率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号