首页> 外文期刊>Polymer Composites >Isothermal Crystallization Behavior of Poly(L-lactic acid)/Organo-Montmorillonite Nanocomposites
【24h】

Isothermal Crystallization Behavior of Poly(L-lactic acid)/Organo-Montmorillonite Nanocomposites

机译:聚(L-乳酸)/有机蒙脱土纳米复合材料的等温结晶行为

获取原文
获取原文并翻译 | 示例
       

摘要

The isothermal crystallization behavior of poly(L-lactic acid)/organo-montmorillonite nanocomposites (PLLA/ OMMT) with different content of OMMT, using a kind of twice-functionalized organoclay (TFC), prepared by melt intercalation process has been investigated by optical depolarizer. In isothermal crystallization from melt, the induction periods t_i) and half times for overall PLLA crystallization (100°C ≤ T_c ≤ 120°C) were affected by the temperature and the content of TFC in nanocomposites. The kinetic of isothermal crystallization of PLLA/TFC nanocomposites was studied by Avrami theory. Also, polarized optical photomicrographs supplied a direct way to know the role of TFC in PLLA isothermal crystallization process. Wide angle X-ray diffraction (WAXD) patterns showed the nanostructure of PLLA/TFC material, and the PLLA crystalline integrality was changed as the presence of TFC. Adding TFC led to the decrease of equilibrium melting point of nanocomposites, indicating that the layered structure of clay restricted the full formation of crystalline structure of polymer. The specific interaction between PLLA and TFC was characterized by the Flory-Huggins interaction parameter (B), which was determined by the equilibrium melting point depression of nanocomposites. The final values of B showed that PLLA was more compatible with TFC than normal OMMT.
机译:用一种熔融插层法制备的双官能化有机粘土(TFC),研究了不同OMMT含量的聚(L-乳酸)/有机蒙脱土纳米复合材料(PLLA / OMMT)的等温结晶行为。去偏振器。在从熔体中进行等温结晶时,整个复合材料的PLLA结晶诱导时间(t_i)和半衰期(100°C≤T_c≤120°C)受温度和纳米复合材料中TFC含量的影响。利用Avrami理论研究了PLLA / TFC纳米复合材料的等温结晶动力学。同样,偏振光学显微照片提供了直接的方法,可以了解TFC在PLLA等温结晶过程中的作用。广角X射线衍射(WAXD)模式显示了PLLA / TFC材料的纳米结构,并且随着TFC的存在,PLLA的结晶完整性发生了变化。加入TFC导致纳米复合材料的平衡熔点降低,表明粘土的层状结构限制了聚合物晶体结构的完全形成。 PLLA和TFC之间的特定相互作用用Flory-Huggins相互作用参数(B)表征,该参数由纳米复合材料的平衡熔点降低确定。 B的最终值表明PLLA与TFC的相容性高于正常OMMT。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号