首页> 外文期刊>Physics of plasmas >Heat pulse propagation studies on DIII-D and the Tokamak Fusion Test Reactor
【24h】

Heat pulse propagation studies on DIII-D and the Tokamak Fusion Test Reactor

机译:DIII-D和托卡马克聚变试验反应堆的热脉冲传播研究

获取原文
获取原文并翻译 | 示例
           

摘要

Sawtooth phenomena have been studied on DIII-D and the Tokamak Fusion Test Reactor (TFTR) [D. Meade and the TFTR Group, in Proceedings of the International Conference on Plasma Physics and Controlled Nuclear Fusion, Washington, DC, 1990 (International Atomic Energy Agency, Vienna, 1991), Vol. 1, pp. 9-24]. In the experiments the sawtooth characteristics were studied with fast electron temperature (ECE) and soft x-ray diagnostics. For the first time, measurements of a strong ballistic electron heat pulse were made in a shaped tokamak (DIII-D) [J. Luxon and DIII-D Group, in Proceedings of the 11th International Conference on Plasma Physics and Controlled Nuclear Fusion Research, Kyoto (International Atomic Energy Agency, Vienna, 1987), Vol. 1, p. 159] and the "ballistic effect" was stronger than was previously reported on TFTR. Evidence is presented in this paper that the ballistic effect is related to the fast growth phase of the sawtooth precursor. Fast, 2 ms interval, measurements on DIII-D were made of the ion temperature evolution following sawteeth and partial sawteeth to document the ion heat pulse characteristics. It is found that the ion heat pulse does not exhibit the very fast, "ballistic" behavior seen for the electrons. Further, for the first time it is shown that the electron heat pulses from partial sawtooth crashes (on DIII-D and TFTR) are seen to propagate at speeds close to those expected from the power balance calculations of the thermal diffusivities whereas heat pulses from fishbones propagate at rates more consistent with sawtooth induced heat pulses. These results suggest that the fast propagation of sawtooth-induced heat pulses is not a feature of nonlinear transport models, but that magnetohydrodynamic events can have a strong effect on electron thermal transport. (C) 2000 American Institute of Physics. [S1070-664X(00)02012-7]. [References: 33]
机译:在DIII-D和Tokamak聚变试验反应堆(TFTR)上已经研究了锯齿现象[D. Meade和TFTR小组,在1990年华盛顿特区举行的国际等离子体物理和受控核聚变国际会议论文集(国际原子能机构,维也纳,1991年),第一卷。 1,第9-24页]。在实验中,通过快速电子温度(ECE)和软X射线诊断来研究锯齿特性。首次在成形托卡马克(DIII-D)中测量了强弹道电子热脉冲[J. Luxon和DIII-D集团在《第11届等离子体物理与可控核聚变研究国际会议论文集》(京都,国际原子能机构,维也纳,1987年),第1卷。 1页159],“弹道效应”比先前在TFTR上报道的要强。本文提供的证据表明,弹道效应与锯齿前体的快速生长阶段有关。在DIII-D上以2毫秒的间隔快速测量了锯齿和部分锯齿之后的离子温度变化,以记录离子热脉冲特性。发现离子热脉冲没有表现出对于电子所看到的非常快的“弹道”行为。此外,首次显示出部分锯齿形碰撞(在DIII-D和TFTR上)产生的电子热脉冲传播的速度接近热扩散率功率平衡计算所预期的速度,而鱼骨的热脉冲以与锯齿感应热脉冲更一致的速率传播。这些结果表明,锯齿状热脉冲的快速传播不是非线性传输模型的特征,而是磁流体动力学事件可以对电子热传输产生强烈影响。 (C)2000美国物理研究所。 [S1070-664X(00)02012-7]。 [参考:33]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号