...
首页> 外文期刊>Physics of fluids >Wall-parallel stereo particle-image velocimetry measurements in the roughness sublayer of turbulent flow overlying highly irregular roughness
【24h】

Wall-parallel stereo particle-image velocimetry measurements in the roughness sublayer of turbulent flow overlying highly irregular roughness

机译:高度不规则粗糙度覆盖的湍流粗糙度子层中平行壁的立体粒子图像测速仪测量

获取原文
获取原文并翻译 | 示例
           

摘要

Stereo particle-image velocimetry measurements were conducted in a streamwise-spanwise (x - z) plane deep within the roughness sublayer (y = 0.047δ; δ is the boundary-layer thickness) of a zero-pressure-gradient turbulent boundary layer overlying highly irregular surface roughness replicated from a turbine blade damaged by foreign-material deposition. The ensemble-averaged streamwise velocity defect revealed the tendency of the roughness to promote channeling of the flow in the form of low-momentum pathways (LMPs) and high-momentum pathways. Enhanced turbulent and vortical activity was observed both between and along the spanwise boundaries of these streamwise-elongated pathways. In particular, streamwise pathways of wall-normal vortex cores of opposing rotational sense were observed along the spanwise boundaries of the identified LMP in the rough-wall flow. Conditional averaging revealed that these counter-rotating vortical motions are associated with streamwise flow against the mean-flow direction and could perhaps be the origination mechanism of the LMPs. Two-point correlation coefficients of velocity and swirling strength reflected large-scale streamwise coherence of these quantities along and outboard of the identified LMP in the rough-wall flow, supporting the notion that the motions responsible for the LMP have large-scale, streamwise coherence. Finally, the influence of different topographical scales of the roughness on the flow in the roughness sublayer was explored using low-order models of the original, full surface as originally proposed by R. Mejia-Alvarez and K. T. Christensen [Phys. Fluids22(1), 015106 (2010)]. While a model containing only the largest topographical scales qualitatively reproduced the features of the full-surface flow, additional intermediate topographical scales were required to quantitatively reproduce the statistical and structural nature of the full-surface flow in the roughness sublayer.
机译:立体粒子图像测速仪的测量是在高度覆盖的零压力梯度湍流边界层的粗糙度子层(y =0.047δ;δ为边界层厚度)内的深度方向上进行的。由异物沉积损坏的涡轮叶片复制的不规则表面粗糙度。整体平均流速度缺陷揭示了粗糙度以低动量路径(LMPs)和高动量路径的形式促进流动通道化的趋势。在这些沿河道延长的路径之间以及沿其跨度边界都观察到了增强的湍流和涡旋活动。特别是,沿着粗糙壁流中已识别的LMP的翼展方向边界观察到了具有相反旋转方向的壁法向涡旋核的水流路径。条件平均表明,这些反向旋转的涡旋运动与逆着平均流方向的水流有关,并且可能是LMP的起源机制。速度和旋流强度的两点相关系数反映了这些量沿粗糙壁流中所识别的LMP的外侧和外侧的大规模沿流相干性,从而支持了负责LMP的运动具有大规模沿流相干性的观点。最后,使用R. Mejia-Alvarez和K. T. Christensen最初提出的原始,完整表面的低阶模型,探索了粗糙度的不同地形尺度对粗糙度子层中流动的影响。流体22(1),015106(2010)]。虽然仅包含最大地形比例尺的模型在质量上重现了整个表面流的特征,但需要其他中间地形比例尺来定量地再现粗糙度子层中整个表面流的统计和结构性质。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号