首页> 外文期刊>TERI Information Digest on Energy and Environment >Effect of protic ionic liquid treatment on the pyrolysis products of lignin extracted from oil palm biomass
【24h】

Effect of protic ionic liquid treatment on the pyrolysis products of lignin extracted from oil palm biomass

机译:质谱离子液体处理对油棕生物质中木质素热解产物的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The lignin extracted from biomass acts as a renewable energy source with a vast range of value-added applications. Aprotic ionic liquid pyridinium formate [PyFor] has been successfully used for lignin extraction from various morphological parts of the oil palm biomass (OPB) plant, such as empty fruit bunches (EFB), palm mesocarp fibre (PMF), and palm kernel shell (PKS). In this study, the pyrolysis of [PyFor] extracted lignin samples is studied in the kinetic regime using thermogravimetric analyzer in a non-isothermal manner. Three kinetic models, namely, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, were employed to determine activation energies (E_a) of [PyFor] extracted lignin samples. The average E_a values for EFB lignin using FWO, KAS, and Starink methods were 28.44, 23.74, and 23.94 kJ/mol, respectively, while for PMF and PKS lignins were 62.97, 55.28, 56.83 kJ/mol and 129.20,122.93, 119.28 kJ/mol, respectively. Starink method was further used to determine the pre-exponential factor and thermodynamic parameters for kraft lignin (KL) and [PyFor] extracted lignins. The thermokinetics and thermodynamic parameters indicate that [PyFor] treatment increased the thermal stability of extracted lignins. Calorific and CHNS values of both OPB and [PyFor] extracted lignins showed that [PyFor] treatment affected the lignin and carbon content of EFB, PMF, and PKS lignins. The calorific values of the PKS lignin (28.20 kJ/g) were found to be higher than those of EFB (27.05 kJ/g) and PMF (27.40 kJ/g) lignins. Elemental analysis showed that the higher calorific values of PKS lignin are due to higher carbon content. Py-GC/MS analysis indicated that [PyFor] extracted lignins provided more phenolic and aromatic contents with the least acid concentrations, making them suitable biofuels. It was concluded that [PyFor] treatment provided a potential way to improve the thermal conversion efficiency of extracted lignins.
机译:从生物量提取的木质素用作可再生能源,具有广泛的增值应用。非质子离子液体吡啶吡啶甲酸酯[pyfor]已成功用于木质素提取,从油棕棕榈生物量(opb)植物的各种形态部分,例如空果束(EFB),棕榈叶mesocarp纤维(PMF)和棕榈仁壳( PKS)。在这项研究中,使用热量分析仪以非等温的方式在动力学制度中研究了[pyfor]提取的木质素样品的热解。使用三种动态模型,即Flynn-Wall-Ozawa(FWO),Kissinger-Akahira-Sunose(Kas)和饥饿,用于确定[Pyfor]提取的木质素样本的激活能量(E_A)。使用FWO,KAS和饥饿方法的EFB木质素的平均E_A值分别为28.44,23.74和23.94kJ / mol,而PMF和PKS LIGNINS为62.97,55.28,56.83 kJ / mol和129.20,122.93,119.28 kJ / mol分别。饥饿方法进一步用于确定牛皮蛋白(KL)和[Pyfor]提取的木质素的预指数因子和热力学参数。热动力学和热力学参数表明[Pyfor]治疗增加了提取的木质素的热稳定性。 OPB和[Pyfor]的热量和CHN值提取的木质素显示[PYFOR]治疗影响了EFB,PMF和PKS LIGNINS的木质素和碳含量。发现PKS木质素(28.20kJ / g)的热值高于EFB(27.05 kJ / g)和pMF(27.40kJ / g)木质素。元素分析表明,PKS木质素的较高的热值是由于碳含量较高。 Py-GC / MS分析表明[Pyfor]提取的木质素提供更多酚类和芳族内容物,其具有最低酸浓度,使其成为合适的生物燃料。结论是[Pyfor]处理提供了提高提取的木质素热转换效率的潜在方法。

著录项

  • 来源
  • 作者单位

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

    Department of Chemical Engineering NFC Institute of Engineering and Fertilizer Research Faisalabad Pakistan;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号