首页> 外文期刊>Surface Science >Sol-gel growth of Gd2MoO6 : Eu3+ nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6 : Eu3+) and their luminescent properties
【24h】

Sol-gel growth of Gd2MoO6 : Eu3+ nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6 : Eu3+) and their luminescent properties

机译:SiO2球体(SiO2 @ Gd2MoO6:Eu3 +)上Gd2MoO6:Eu3 +纳米晶层的溶胶凝胶生长及其发光特性

获取原文
获取原文并翻译 | 示例
           

摘要

SiO2@Gd2MoO6:EU3+ core-shell phosphors were prepared by the sol-gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy ITEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO2@Gd2MoO6:Eu3+ core-shell phosphors. The XRD results demonstrate that the Gd2MoO6:Eu3+ layers on the SiO2 spheres begin to crystallize after annealing at 600 degrees C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 600 nm), are not agglomerated, and have a smooth surface. The thickness of the Gd2MoO6:Eu3+ shells on the SiO2 cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). The Eu3+ shows a strong PL luminescence (dominated by D-5(0)-F-7(2) red emission at 613 nm) under the excitation of 307 nm UV light. The PL intensity of Eu3+ increases with increasing the annealing temperature and the number of coating cycles. (c) 2006 Elsevier B.V. All rights reserved.
机译:通过溶胶-凝胶法制备了SiO2 @ Gd2MoO6:EU3 +核壳型荧光粉。 X射线衍射(XRD),傅立叶变换红外光谱(FT-IR),场发射扫描电子显微镜(FESEM),能量色散X射线光谱(EDS),透射电子显微镜ITEM),光致发光(PL)光谱以及动力学衰减被用来表征所得的SiO2 @ Gd2MoO6:Eu3 +核-壳磷光体。 XRD结果表明,在600℃退火后,SiO2球上的Gd2MoO6:Eu3 +层开始结晶,并且结晶度随退火温度的升高而增加。所获得的核-壳磷光体具有接近理想的球形,具有窄的尺寸分布(平均尺寸为约600nm),没有团聚并且具有光滑的表面。通过改变沉积周期数(四个沉积周期为50 nm),可以轻松地调整SiO2核上Gd2MoO6:Eu3 +壳的厚度。 Eu3 +在307 nm紫外光的激发下显示出很强的PL发光(主要由613 nm处的D-5(0)-F-7(2)红色发射)。 Eu3 +的PL强度随退火温度和涂层循环次数的增加而增加。 (c)2006 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号