A VSWR-Protected Silicon Bipolar RF Power Amplifier With Soft-Slope Power Control

摘要

This paper presents the design and measured performance of a 1.8-GHz power amplifier featuring load mismatch protection and soft-slope power control. Load-mismatch-induced breakdown can be avoided by attenuating the RF power to the final stage during overvoltage conditions. This was accomplished by means of a feedback control system, which detects the peak voltage at the output collector node and clamps its value to a given threshold by varying the circuit gain. The issue of output power control has been addressed as well. To this end, a temperature-compensated bias network is proposed, which allows a moderate power control slope (dB/V) to be achieved by varying the circuit quiescent current according to an exponential law. The nonlinear power amplifier was fabricated using a low-cost silicon bipolar process with a 6.4-V breakdown voltage. It delivers a 33.5-dBm saturated output power with 46% maximum power-added efficiency and 36-dB gain at a nominal 3.5-V supply voltage. The device is able to tolerate a 10:1 load standing-wave ratio up to a 5.1-V supply voltage. Power control slope is lower than 80 dB/V between -15 dBm and the saturated output power level.