首页> 外文期刊>Solid-State Circuits, IEEE Journal of >The Design of All-Digital Polar Transmitter Based on ADPLL and Phase Synchronized ΔΣ Modulator
【24h】

The Design of All-Digital Polar Transmitter Based on ADPLL and Phase Synchronized ΔΣ Modulator

机译:基于ADPLL和相位同步ΔΣ调制器的全数字极性发射机的设计

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

An improved architecture of polar transmitter (TX) is presented. The proposed architecture is digitally-intensive and mainly composed of an all-digital PLL (ADPLL) for phase modulation, a 1-bit low-pass delta sigma ΔΣ modulator for envelop modulation, and a H-bridge class-D power amplifier (PA) for differential signaling. The ΔΣ modulator is clocked using the phase modulated RF carrier to ensure phase synchronization between the amplitude and phase path, and to guarantee the PA is switching at zero crossings of the output current. An on-chip pre-filter is used to reduce the parasitic capacitance from packages at the switch stage output. The high over sampling ratio of the ΔΣ modulator move quantization noise far away from the carrier frequency, ensuring good in-band performance and relax filter requirements. The on-chip filter also acts as impedance matching and differential to single-ended conversion. The measured digital transmitter consumes 58 mW from a 1-V supply at 6.8 dBm output power.
机译:提出了一种改进的极地发射机(TX)架构。拟议的架构是数字密集型的,主要由用于相位调制的全数字PLL(ADPLL),用于包络调制的1位低通delta sigmaΔΣ调制器和H桥D类功率放大器(PA)组成。 )用于差分信令。 ΔΣ调制器使用相位调制的RF载波计时,以确保幅度和相位路径之间的相位同步,并确保PA在输出电流的零交叉处切换。片上预滤波器用于减小开关级输出处封装的寄生电容。 ΔΣ调制器的高过采样率使量化噪声远离载波频率,从而确保了良好的带内性能并放宽了滤波器要求。片上滤波器还用作阻抗匹配和差分至单端转换。被测数字发射机在6.8 dBm输出功率下的1-V电源消耗58 mW。

著录项

  • 来源
    《Solid-State Circuits, IEEE Journal of》 |2012年第5期|p.1154-1164|共11页
  • 作者

    Jian Chen;

  • 作者单位
  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号