On-road detection of trucks with high NOx emissions from a patrol vehicle with on-board FTIR analyzer

摘要

Technological advances in heavy-duty vehicle engines, allowing them to reach NO_x emissions comparable to European diesel passenger cars per km driven, are being compromised by aftermarket defeat devices such as selective catalytic reduction (SCR) emulators, many of which can be quickly deactivated by the driver. In a pilot study, the prevalence of trucks with excess NO_x emissions on Czech motorways was evaluated using an ordinary Customs Administration patrol vehicle temporarily fitted with a portable fast-response Fourier Transform Infra Red (FTIR) analyzer, acting as an impromptu chase vehicle. The Euro emissions category of the truck was provided from the motorway toll collection transponders. A total of 222 unique trucks were measured during a one-week pilot project. Of these, 66% were Euro Ⅵ, 25% were Euro Ⅴ, and 9% were older categories. NO/CO_2 ratios were calculated as a ratio of numerical integrals of the peaks of measured concentrations, as a ratio of maximum measured concentrations, and by linear regression, with the regression approach yielding most realistic results and mean calculated error of 0.2 g/kWh NO. At assumed 85% NO in NO_x and 634 g/kWh mean CO_2 emissions, the mean emissions of the cleanest 83% of Euro V and cleanest 63% of Euro Ⅵ trucks were within the corresponding NO_x limit (2 g/kWh for Euro Ⅴ, 0.46 g/kWh for Euro Ⅵ) multiplied by a factor of 1.5. Providing for some allowance for legitimate occurrences of high NO_x emissions, about 10-15% of Euro Ⅴ and about 10-25% of Euro Ⅵ trucks are believed to be excess emitters, with no SCR functionality on about 10-15% of Euro Ⅵ trucks. The portable FTIR, temporarily mounted on a law enforcement vehicle, can be readily used as a screening tool, identifying vehicles to be stopped for additional inspection, but also during roadside emissions inspections.