Fabrication of refreshable aptasensor based on hydrophobic screen-printed carbon electrode interface

摘要

In order to solve the problem that the sensor cannot be reused due to the passivation of the electrode surface, a refreshable electrochemical aptasensor based on a hydrophobic electrode and a magnetic nanocomposite had been developed. Therein, the hydrophobic electrode was formed by modifying a screen-printed carbon electrode (SPCE) with polydimethylsiloxane (PDMS), which could avoid adsorption of molecules on the electrode surface due to its hydrophobicity. Combined with aptamer (Apt), the synthesized graphene oxide-ferroferric oxide (GO-Fe_3O_4) was used as a magnetic catcher to capture specific organophosphorous pesticides (OPs), which could be removed to the working area of SPCE with a magnet for electrochemical detection. The performance analysis of hydrophobic electrode showed that the SPCE could be used twice. When the electrochemical signals of Apt/GO-Fe_3O_4 and OPs/Apt/GO-Fe_3O_4 were recorded using the same SPCE, the current differences between them were directly related to the concentrations of OPs. Through the contrast test between the spiked vegetable samples and the OPs standard solutions, it was found that the OPs concentrations could be qualitatively evaluated by comparing the current differences. At the same time, the characteristic of collecting target with magnetic catcher was helpful for detecting OPs with a low concentration. Therefore, the refreshable aptasensor provided a huge potential to small molecule target evaluation.