...
首页> 外文期刊>Radiation Protection Dosimetry >THERMOLUMINESCENCE EMISSION SPECTRA FOR THE LiF:Mg,Cu,Na,Si THERMOLUMINESCENT MATERIALS WITH VARIOUS CONCENTRATIONS OF THE DOPANTS (3-D MEASUREMENT)
【24h】

THERMOLUMINESCENCE EMISSION SPECTRA FOR THE LiF:Mg,Cu,Na,Si THERMOLUMINESCENT MATERIALS WITH VARIOUS CONCENTRATIONS OF THE DOPANTS (3-D MEASUREMENT)

机译:掺杂剂浓度不同的LiF:Mg,Cu,Na,Si热发光材料的热发光发射光谱(3-D测量)

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The thermoluminescence (TL) emission spectra from LiF TL materials, called KLT-300 (LiF:Mg,Cu,Na,Si) with various dopant concentrations are measured and analysed. These KLT-300 materials were developed by the Korea Atomic Energy Research Institute (KAERI) to achieve an enhancement of the thermal stability in TL readings. Six types of samples are prepared with different dopant concentrations in the following ranges; Mg (0-0.20 mol(percent)), Cu (0-0.05 mol(percent)), Na and Si (0-0.9 mol(percent)). The spectra measurements are carried out for the six types of samples using a TL emission spectra measurement device. The spectra measurement device consists of a monochromator, photomultiplier tube and temperature control unit to thermally stimulate the samples. The measured data shows the light emission during heating of the sample as a function of temperature and wavelength (three-dimensional TL spectra). The spectra were analysed using a method of deconvolution based on gaussian curve. The wavelength of a main peak of the emission spectra changes depending on the existence of the Cu dopant, while intensity of the spectra rapidly changes with the Cu dopant concentrations. The 385 nm emission is mainly observed in all the spectra from the samples with the Cu dopant, but in those from the samples without the Cu dopant a very weak 401 nm emission is mainly observed. However, any change in the wavelength at a main peak of the TL emission spectra from the sample materials with Na and Si dopants is not observed but that in the intensity at a peak of the spectra is observed.
机译:测量并分析了LiF TL材料(称为KLT-300,LiF:Mg,Cu,Na,Si)具有各种掺杂剂浓度的热发光(TL)发射光谱。这些KLT-300材料是由韩国原子能研究院(KAERI)开发的,旨在提高TL读数的热稳定性。制备了六种类型的样品,这些样品的掺杂浓度在以下范围内: Mg(0-0.20 mol(百分比)),Cu(0-0.05 mol(百分比)),Na和Si(0-0.9 mol(百分比))。使用TL发射光谱测量设备对六种样品进行光谱测量。光谱测量设备由单色仪,光电倍增管和温度控制单元组成,以热刺激样品。测得的数据显示出样品在加热过程中的发光随温度和波长的变化(三维TL光谱)。使用基于高斯曲线的反褶积方法分析光谱。发射光谱的主峰的波长根据Cu掺杂剂的存在而变化,而光谱的强度随Cu掺杂剂浓度而迅速变化。在具有Cu掺杂剂的样品的所有光谱中主要观察到385nm的发射,但是在没有Cu掺杂剂的样品的那些光谱中,主要观察到非常弱的401nm的发射。然而,没有观察到来自具有Na和Si掺杂剂的样品材料的TL发射光谱的主峰处的波长的任何变化,但是观察到了光谱的峰处的强度的任何变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号