Slingsby T42 Eagle

摘要

In Part 1 last month we covered the construction of the fuselage and canopies. We continue the construction now with the flying surfaces, covering and maiden flight. Start by offering up a piece of 3 mm balsa to the underside of the fin, draw around and cut it out. Use a ruler against the LE of the fin to mark where it would otherwise meet the tailplane and then pin Fairing 1 to the tailplane. Make up a wedge of 3 mm balsa and wedge the top and bottom ribs in the correct place between the tailplane and the fin, before cyanoing in place.