首页> 外文期刊>Quality and Reliability Engineering International >Bayesian Belief Networks for System Fault Diagnostics
【24h】

Bayesian Belief Networks for System Fault Diagnostics

机译:用于系统故障诊断的贝叶斯信念网络

获取原文
获取原文并翻译 | 示例
       

摘要

Fault diagnostic methods aim to recognize when faults exist on a system and to identify the failures that have caused the fault. The symptoms of the fault are obtained from readings from sensors located on the system. When the observed readings do not match those expected then a fault can exist. Using the detailed information provided by the sensors, a list of the failures (singly or in combinations) that could cause the symptoms can be deduced. In the last two decades, fault diagnosis has received growing attention due to the complexity of modern systems and the consequent need for more sophisticated techniques to identify the failures when they occur. Detecting the causes of a fault quickly and efficiently means reducing the costs associated with the system unavailability and, in certain cases, avoiding the risks of unsafe operating conditions. Bayesian belief networks (BBNs) are probabilistic models that were developed in artificial intelligence applications but are now applied in many fields. They are ideal for modelling the causal relations between faults and symptoms used in the detection process. The probabilities of events within the BBN can be updated following observations (evidence) about the system state. In this paper we investigate how BBNs can be applied to diagnose faults on a system. Initially Fault trees (FTs) are constructed to indicate how the component failures can combine to cause unexpected deviations in the variables monitored by the sensors. Converting FTs into BNs enables the creation of a model that represents the system with a single network, which is constituted by sub-networks. The posterior probabilities of the components' failures give a measure of those components that have caused the symptoms observed. The method gives a procedure that can be generalized for any system where the causality structure can be developed relating the system component states to the sensor readings. The technique is demonstrated with a simple example system.
机译:故障诊断方法旨在识别系统上何时存在故障,并识别引起故障的故障。故障症状是从系统上的传感器的读数中获得的。如果观察到的读数与预期的读数不匹配,则可能存在故障。使用传感器提供的详细信息,可以推断出可能导致症状的故障列表(单个或组合)。在过去的二十年中,由于现代系统的复杂性以及随之而来的是需要更复杂的技术来识别故障的原因,故障诊断受到越来越多的关注。快速有效地检测故障原因意味着减少与系统不可用性相关的成本,并且在某些情况下,避免了不安全操作条件的风险。贝叶斯信念网络(BBN)是在人工智能应用程序中开发的概率模型,但现在已应用于许多领域。它们是建模检测过程中使用的故障和症状之间的因果关系的理想选择。可以根据对系统状态的观察(证据)来更新BBN中事件的概率。在本文中,我们研究了如何将BBN应用于诊断系统上的故障。最初,构造故障树(FT)来指示组件故障如何组合在一起,从而引起由传感器监视的变量的意外偏差。将FT转换为BN可以创建一个模型,该模型代表具有单个网络的系统,该网络由子网组成。组件故障的后验概率可以衡量引起症状的那些组件。该方法给出了可以推广到任何系统的过程,在该系统中可以建立因果关系,将系统组件状态与传感器读数相关联。通过一个简单的示例系统演示了该技术。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号