...
首页> 外文期刊>日本建築学会构造系論文集 >Study On Fatigue Characteristics Of Cross Welded Joints Of High Strength Steel
【24h】

Study On Fatigue Characteristics Of Cross Welded Joints Of High Strength Steel

机译:高强度钢交叉焊接接头疲劳特性研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

High or low cycle fatigue damage of buildings is caused by wind loading or seismic loading, respectively. In this study, cross welded joints were tested to clarify fatigue characteristics under high to low cycle condition. Effect of elastic stress concentration factor(K1) on fatigue characteristics is clarified from the viewpoint of fatigue life (N_f)and crack initiation life(N_i). The results obtained are as follows: (1)Fatigue characteristics of the welded joints can be qualitatively predicted by using K_t of toe shape. (2)As K_t is higher and N_f is smaller, the ratio of N_i/N_f becomes smaller, and crack growth life (Nc) is dominant in N_f (3)In the case of high cycle fatigue, fatigue characteristics can be evaluated by using S-N curve and Miner's rule. In the case of low cycle fatigue, fatigue characteristics can be evaluated by using Nc from initial defect.
机译:建筑物的高或低周疲劳损坏分别是由风荷载或地震荷载引起的。在这项研究中,对交叉焊接接头进行了测试,以弄清在高至低循环条件下的疲劳特性。从疲劳寿命(N_f)和裂纹萌生寿命(N_i)的角度,阐明了弹性应力集中系数(K1)对疲劳特性的影响。得到的结果如下:(1)采用趾形K_t可以定性地预测焊接接头的疲劳特性。 (2)随着K_t的增加和N_f的减小,N_i / N_f的比值变小,并且裂纹扩展寿命(Nc)在N_f中占主导地位(3)在高周疲劳的情况下,疲劳特性可以通过使用SN曲线和Miner规则。在低周疲劳的情况下,可以通过使用Nc从初始缺陷处评估疲劳特性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号