Investigation of transition between spark ignition and controlled auto-ignition combustion in a V6 direct-injection engine with cam profile switching

摘要

Controlled auto-ignition (CAI) combustion, also known as homogeneous charge compression ignition (HCCI), can be achieved by trapping residuals with early exhaust valve closure in a direct-fuel-injection in-cylinder four-stroke gasoline engine (through the employment of low-lift cam profiles). Because the operating region is limited to low-load and midload operation for CAI combustion with a low-lift cam profile, it is important to be able to operate spark ignition (SI) combustion at high loads with a normal cam profile. A 3.0 l prototype engine was modified to achieve CAI combustion, using a cam profile switching mechanism that has the capability to switch between high- and low-lift cam profiles. A strategy was used where a high-lift profile could be used for SI combustion and a low-lift profile was used for CAI combustion. Initial analysis showed that for a transition from SI to CAI combustion, misfire occurred in the first CAI transitional cycle. Subsequent experiments showed that the throttle opening position and switching time could be controlled to avoid misfire. Further work investigated transitions at different loads and from CAI to SI combustion. [PUBLICATION ABSTRACT]