Construction and testing of self-drilled soil nails

摘要

Current standards and best practice guidance recognise that testing of self-drilled hollow bar soil nails can be problematic as conventional packers and debonded lengths cannot be constructed. As a result, this causes difficulty in testing and confirming the ultimate bond resistance within the passive zone of a soil-nailed slope, and thus the design soil nail lengths. This paper provides a summary and review of the various testing procedures adopted for a soil nail construction project in Scotland. The practical design considerations, and their validation through the installation and testing of 49 sacrificial test nails, are detailed. The construction issues associated with the nail installation and testing are also outlined and discussed in light of the results obtained using different testing approaches. The aim of this case study is to report on the experiences with installation and testing of hollow bar soil nails. The objectives are to develop an initial data base of available soil-grout bond strength of hollow bar soil nails based on the several practical installation procedures used in this project and to establish areas for improvement of installation, testing and quality control in order to perform comparable pullout tests on self-drilled hollow bar soil nails.