Effect of Clay Types on the Mechanical, Dynamic Mechanical and Morphological Properties of Polypropylene Nanocomposites

摘要

In the present investigation Polypropylene-Maleic anhydride grafted polypropylene-organically modified MMT (PP-MAPP-OMMT) nanocomposites were prepared by melt mixing in a twin screw extruder followed by injection molding. The effect of clay chemistry and compatibilizer on the properties of the nanocomposites has been studied. Sodium montmorillonite has been organically modified using quaternary and alkyl amine intercalants. A comparative account with commercial quaternary ammonium modified clays i.e Cloisite 20A, Cloisite 15A and Cloisite 30B has been presented. Storage modulus of PP matrix also increased in the nanocomposites, indicating an increase in the stiffness of the matrix polymer with the addition of organically modified nanoclays. The morphology of the nanocomposites has been examined using wide angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). Morphological findings revealed efficient dispersion of organically modified nanoclays within the PP matrix. MAPP compatibilized PP/Cloisite 15A nanocomposites displayed finely dispersed exfoliated nanomorphology as compared with other systems.