...
首页> 外文期刊>Polymer Degradation and Stability >The synergistic effect of zinc oxide and phenylphosphonic acid zinc salt on the crystallization behavior of poly (lactic acid)
【24h】

The synergistic effect of zinc oxide and phenylphosphonic acid zinc salt on the crystallization behavior of poly (lactic acid)

机译:氧化锌和苯基膦酸锌盐对聚乳酸结晶行为的协同作用

获取原文
获取原文并翻译 | 示例

摘要

In order to improve the crystallinity and crystallization rate of poly (lactic acid) (PLA), a method for the preparation of a composite nucleating agent (CNA) consisting of zinc oxide and phenylphosphonic acid zinc salt was proposed. Zinc oxide, phenylphosphonic acid zinc salt and CNA were mixed into PLA through the melt blending method, respectively. The resultant PLA samples were characterized by differential scan calorimeter (DSC) and polarized optical microscope (POM). The DSC results showed that the crystallinity and crystallization temperature of the PLA samples with CNA were higher than those of the other PLA samples. The phenomena of crystallization nucleation and growth of various PLA samples were observed by means of POM. Isothermal and non-isothermal crystallization behavior of various PLA samples with different addition of CNA was studied, the corresponding result showed that the overall crystallinity, crystallization rate, nucleation density, and spherulite number increased obviously, as well as the crystallization time decreased, indicating the heterogeneous nucleating effect of CNA on the crystallization of PLA. For each of the component of CNA, the phenylphosphonic acid zinc salt could be used as an effective site of heterogeneous nucleation, resulting in the increasing nucleation density of PLA, and the zinc oxide could be acted as a good crystallization promoter for promoting the crystal growth of PLA. At the CNA content of 1 phr, CNA had a significant impact on crystallization behavior of PLA with a little negative influence on the molecular weight of PLA.
机译:为了提高聚乳酸(PLA)的结晶度和结晶速率,提出了一种制备由氧化锌和苯基膦酸锌盐组成的复合成核剂(CNA)的方法。通过熔融共混法将氧化锌,苯基膦酸锌盐和CNA分别混入PLA中。所得的PLA样品通过差示扫描量热仪(DSC)和偏振光学显微镜(POM)进行表征。 DSC结果表明,含CNA的PLA样品的结晶度和结晶温度高于其他PLA样品。通过POM观察到各种PLA样品的结晶成核现象和生长现象。研究了不同添加CNA的PLA样品的等温和非等温结晶行为,相应的结果表明,总结晶度,结晶速率,成核密度和球晶数均明显增加,且结晶时间缩短,表明CNA对PLA结晶的非均相成核作用。对于CNA的每个组分,可以使用苯基膦酸锌盐作为异质成核的有效位点,从而导致PLA的成核密度增加,并且氧化锌可以作为促进结晶生长的良好结晶促进剂的解放军。当CNA含量为1 phr时,CNA对PLA的结晶行为有显着影响,而对PLA分子量的影响却很小。

著录项

  • 来源
    《Polymer Degradation and Stability》 |2015年第12期|25-35|共11页
  • 作者单位

    School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, PR China;

    School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, PR China;

    School of Materials and Metallurgical Engineering, Guizhou Institute of Technology, Guiyang City, Guizhou Province 550003, PR China;

    School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, PR China;

    School of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, PR China;

    School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, PR China,No.11, Fucheng Rd., Haidian Dist., Beijing 100048, PR China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Synergistic effect; Poly(lactic acid); Phenylphosphonic acid zinc salt; Zinc oxide; Composite nucleating agent; Crystallization kinetics;

    机译:协同效应;聚乳酸苯基膦酸锌盐;氧化锌复合成核剂;结晶动力学;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号