首页> 外文期刊>Polymer Bulletin >Tensile properties of random copolymers of propylene with ethylene and 1-butene: effect of crystallinity and crystal habit
【24h】

Tensile properties of random copolymers of propylene with ethylene and 1-butene: effect of crystallinity and crystal habit

机译:丙烯与乙烯和1-丁烯的无规共聚物的拉伸性能:结晶度和晶体习性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The tensile modulus of elasticity and yield strength of semicrystalline random copolymers of propylene with different amount on ethylene or 1-butene co-units were analyzed as a function of the crystallinity and the crystal habit/shape. Samples were prepared by cooling the melt to ambient temperature, and subsequent annealing at elevated temperature. Variation of the cooling rate between 10−1 and 103 K s−1 and of the temperature of annealing allowed preparation of semicrystalline specimens with either lamellar or non-lamellar crystals of different size, and with different crystallinity between about 30 and 70%. Young’s modulus and yield strength increase with increasing crystallinity and consistently are lower for samples containing nodular, that is, almost isometric, non-lamellar crystals of low aspect ratio. For samples of identical crystallinity and crystal habit, an only minor effect of presence of co-units in the crystalline and amorphous phases is observed.
机译:分析了不同数量的丙烯在乙烯或1-丁烯共单元上的半结晶无规共聚物的拉伸弹性模量和屈服强度,它是结晶度和晶体习性/形状的函数。通过将熔体冷却至环境温度,然后在高温下退火来制备样品。冷却速率在10 −1 和10 3 K s -1 之间变化以及退火温度允许制备具有以下任一特性的半晶试样不同大小的层状或非层状晶体,结晶度在30%至70%之间。杨氏模量和屈服强度随结晶度的增加而增加,而对于含有球状(即几乎等距的,低纵横比的非层状晶体)的样品,其杨氏模量和屈服强度始终较低。对于具有相同结晶度和晶体习惯的样品,仅观察到在结晶相和无定形相中共单元存在的微小影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号