Uneven dielectric barrier discharge reactors for diesel particulate matter removal

摘要

Uneven dielectric barrier discharge (DBD) reactors driven by positive-negative pulse plasma discharges were investigated for particulate matter (PM) removal from a diesel engine. Two kinds of uneven alumina plates and three kinds of uneven stainless steel plates were used to assemble six kinds of uneven DBD reactors of discharge gaps 0.4-1.0 mm. The experimental results show that PM from diesel engines can be removed using the uneven DBD reactors. The maximum PM removal was 67% at 300 W energy injections using the DBD reactor of 0.4 mm gap distance. PM removal increased with decreasing gap distance. The energy efficiency using the uneven DBD reactor of a shorter gap distance was higher than that using the uneven DBD reactor of a longer gap distance as the uneven DBD reactor of a shorter gap distance has a higher PM deposition rate. The energy efficiency was typically in a range of 3-10.6 g/kWh at an energy density of 2-16 J/L. A comparison of this study with reports given by other research groups is given.