...
首页> 外文期刊>Nuclear Instruments & Methods in Physics Research >Comparison of fresh fuel experimental measurements to MCNPX calculations using self-interrogation neutron resonance densitometry
【24h】

Comparison of fresh fuel experimental measurements to MCNPX calculations using self-interrogation neutron resonance densitometry

机译:使用自审中子共振光密度法将新鲜燃料实验测量与MCNPX计算进行比较

获取原文
获取原文并翻译 | 示例

摘要

A new non-destructive assay technique called Self-Interrogation Neutron Resonance Densitometry (SINRD) is currently being developed at Los Alamos National Laboratory (LANL) to improve existing nuclear safeguards measurements for Light Water Reactor (LWR) fuel assemblies. SINRD consists of four ~(235)U fission chambers (FCs): bare FC, boron carbide shielded FC, Gd covered FC, and Cd covered FC. Ratios of different FCs are used to determine the amount of resonance absorption from ~(235)U in the fuel assembly. The sensitivity of this technique is based on using the same fissile materials in the FCs as are present in the fuel because the effect of resonance absorption lines in the transmitted flux is amplified by the corresponding (n,f) reaction peaks in the fission chamber. In this work, experimental measurements were performed in air with SINRD using a reference Pressurized Water Reactor (PWR) 15×15 low enriched uranium (LEU) fresh fuel assembly at LANL. The purpose of this experiment was to assess the following capabilities of SINRD: (1) ability to measure the effective ~(235)U enrichment of the PWR fresh LEU fuel assembly and (2) sensitivity and penetrability to the removal of fuel pins from an assembly. These measurements were compared to Monte Carlo N-Particle extended transport code (MCNPX) simulations to verify the accuracy of the MCNPX model of SINRD. The reproducibility of experimental measurements via MCNPX simulations is essential to validating the results and conclusions obtained from the simulations of SINRD for LWR spent fuel assemblies.
机译:洛斯阿拉莫斯国家实验室(LANL)目前正在开发一种称为自审中子共振密度测定(SINRD)的新无损测定技术,以改善轻水堆(LWR)燃料组件的现有核保障措施。 SINRD由四个〜(235)U裂变室(FC)组成:裸露的FC,碳化硼屏蔽的FC,Gd覆盖的FC和Cd覆盖的FC。不同FC的比率用于确定燃料组件中〜(235)U的共振吸收量。该技术的敏感性是基于在燃料电池中使用与燃料中相同的易裂变材料,因为传输的磁通中的共振吸收线的作用被裂变室内相应的(n,f)反应峰放大了。在这项工作中,使用LAND上的参考压水堆(PWR)15×15低浓铀(LEU)新鲜燃料组件在空气中以SINRD进行了实验测量。本实验的目的是评估SINRD的以下功能:(1)测量PWR新鲜LEU燃料组件有效〜235K富集的能力,以及(2)从燃料电池中移除燃料销的敏感性和穿透性。部件。将这些测量结果与Monte Carlo N粒子扩展运输代码(MCNPX)模拟进行比较,以验证SINRD的MCNPX模型的准确性。通过MCNPX模拟进行实验测量的可重复性对于验证从LWR乏燃料组件的SINRD模拟获得的结果和结论至关重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号