【24h】

Fast-neutron, coded-aperture imager

机译:快速中子,编码孔径成像器

获取原文
获取原文并翻译 | 示例
           

摘要

This work discusses a large-scale, coded-aperture imager for fast neutrons, building off a proof-of concept instrument developed at the U.S. Naval Research Laboratory (NRL). The Space Science Division at the NRL has a heritage of developing large-scale, mobile systems, using coded-aperture imaging, for long-range γ-ray detection and localization. The fast-neutron, coded-aperture imaging instrument, designed for a mobile unit (20 ft. ISO container), consists of a 32-element array of 15 cm × 15 cm × 15 cm liquid scintillation detectors (EJ-309) mounted behind a 12×12 pseudorandom coded aperture. The elements of the aperture are composed of 15 cm × 15 cm × 10 cm blocks of high-density polyethylene (HDPE). The arrangement of the aperture elements produces a shadow pattern on the detector array behind the mask. By measuring of the number of neutron counts per masked and unmasked detector, and with knowledge of the mask pattern, a source image can be deconvolved to obtain a 2-d location. The number of neutrons per detector was obtained by processing the fast signal from each PMT in flash digitizing electronics. Digital pulse shape discrimination (PSD) was performed to filter out the fast-neutron signal from the γ background. The prototype instrument was tested at an indoor facility at the NRL with a 1.8-μCi and 13-μCi 252Cf neutron/γ source at three standoff distances of 9, 15 and 26 m (maximum allowed in the facility) over a 15-min integration time. The imaging and detection capabilities of the instrument were tested by moving the source in half- and one-pixel increments across the image plane. We show a representative sample of the results obtained at one-pixel increments for a standoff distance of 9 m. The 1.8-μCi source was not detected at the 26-m standoff. In order to increase the sensitivity of the instrument, we reduced the fastneutron background by shielding the top, sides and back of the detector array with 10-cm-thick HDPE. This shielding configuration led to a reduction in the background by a factor of 1.7 and thus allowed for the detection and localization of the 1.8 μCi. The detection significance for each source at different standoff distances will be discussed.
机译:这项工作讨论了一种用于快速中子的大型编码孔径成像器,它是建立在美国海军研究实验室(NRL)开发的概念验证仪器上的。 NRL的太空科学部门具有开发大型移动系统的传统,该系统使用编码孔径成像技术进行远距离γ射线检测和定位。快速中子编码孔径成像仪,是为移动装置(20英尺ISO容器)设计的,由一个32元素的阵列组成,该阵列由15厘米×15厘米×15厘米的液体闪烁探测器(EJ-309)安装在后面12×12伪随机编码孔径。孔的元素由15厘米×15厘米×10厘米的高密度聚乙烯(HDPE)块组成。孔元件的布置在掩模后面的检测器阵列上产生阴影图案。通过测量每个被掩蔽和未被掩蔽的探测器的中子计数数量,并且在了解了掩膜图案的情况下,可以对源图像进行反卷积以获得二维位置。每个探测器的中子数量是通过处理来自闪光灯数字化电子设备中每个PMT的快速信号获得的。执行数字脉冲形状识别(PSD)以从γ背景中滤除快中子信号。原型仪器在NRL的室内设施中使用1.8-Ci和13-Ci 252Cf中子/γ源在15分钟的积分时间内分别在9、15和26 m(设施中允许的最大距离)的三个隔离距离下进行了测试。时间。通过在整个图像平面上以半像素和一像素为单位移动光源来测试仪器的成像和检测能力。我们显示了一个有代表性的示例结果,该示例以9像素的对峙距离以一像素的增量获得。在26米的距离处未检测到1.8μCi的离子源。为了提高仪器的灵敏度,我们用10厘米厚的HDPE屏蔽了探测器阵列的顶部,侧面和背面,从而降低了快中子本底。这种屏蔽配置导致背景降低了1.7倍,因此可以检测和定位1.8μCi。将讨论在不同的隔离距离下每个源的检测重要性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号