首页> 外文期刊>Nuclear fusion >Theory and fluid simulations of boundary-plasma fluctuations
【24h】

Theory and fluid simulations of boundary-plasma fluctuations

机译:边界等离子体波动的理论和流体模拟

获取原文
获取原文并翻译 | 示例
           

摘要

Theoretical and computational investigations of boundary-plasma microturbulence which take into account important effects of the geometry of diverted tokamaks—in particular, the effect of X-point magnetic shear and the termination of field lines on divertor plates—are presented. We first generalize our previous 'heuristic boundary condition' which describes, in a lumped model, the closure of currents in the vicinity of the X-point region to encompass three current-closure mechanisms. We then use this boundary condition to derive the dispersion relation for low-beta flute-like modes in the divertor-leg region under the combined drives of curvature, sheath impedance and divertor tilt effects. The results indicate the possibility of strongly growing instabilities, driven by sheath boundary conditions, and localized in either the private or common flux region of the divertor leg depending on the radial tilt of divertor plates. We revisit the issue of X-point effects on blobs, examining the transition from blobs terminated by X-point shear to blobs that extend over both the main SOL and divertor legs. We find that, for a main-SOL blob, this transition occurs without a free-acceleration period as previously thought, with X-point termination conditions applying until the blob has expanded to reach the divertor plate. We also derive propagation speeds for divertor-leg blobs. Finally, we present fluid simulations of the C-Mod tokamak from the BOUT edge fluid turbulence code, which show main-SOL blob structures with similar spatial characteristics to those observed in the experiment, and also simulations which illustrate the possibility of fluctuations confined to divertor legs.
机译:提出了边界等离子体微湍流的理论和计算研究,其中考虑了转向的托卡马克的几何形状的重要影响,特别是X点磁剪切的影响以及转向盘上场线的终止。我们首先概括我们以前的“启发式边界条件”,该模型在集总模型中描述了X点区域附近的电流闭合,以涵盖三种电流闭合机制。然后,我们使用该边界条件,在曲率,护套阻抗和偏滤器倾斜效应的共同驱动下,得出偏滤器腿区域中低β槽状波状模的色散关系。结果表明,由鞘管边界条件驱动并根据偏心板的径向倾斜,偏心可能会强烈增长,并可能位于偏心腿的私有或公共通量区域。我们回顾了X点对斑点的影响,研究了从X点剪切终止的斑点到在主SOL和分流器支腿上延伸的斑点的过渡。我们发现,对于一个主SOL斑点,这种过渡在没有自由加速期的情况下发生,如先前所认为的那样,其中X点终止条件适用,直到斑点膨胀到分流板为止。我们还导出了偏斜腿斑点的传播速度。最后,我们根据BOUT边缘流体湍流代码对C-Mod托卡马克进行了流体模拟,该模拟显示了主SOL斑点结构具有与实验中观察到的空间特征相似的空间特征,并且还模拟了说明了将波动限定于偏滤器的可能性腿。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号