首页> 外文期刊>NDT & E international >Development of circular arrayed eddy current sensor for detecting fibers orientation and in-plane fiber waviness in unidirectional CFRP
【24h】

Development of circular arrayed eddy current sensor for detecting fibers orientation and in-plane fiber waviness in unidirectional CFRP

机译:圆形阵列涡流传感器在单向CFRP中检测纤维取向和面内波纹度的开发

获取原文
获取原文并翻译 | 示例
           

摘要

This paper proposes a circular arrayed eddy current non-destructive testing sensor for detecting fibers orientation and in-plane fiber waviness defects in unidirectional carbon fibers reinforced polymer (CFRP). The design procedure involves two steps, the application of the rotating rectangular sensor principle on a pair of coils. In this case, to test the used simulation method, the results are experimentally verified. In the second step, the resulted form is exploited to simulate a circular arrayed sensor. This sensor allows the cancellation of the mechanical rotation of the conventional sensors and it permits to reduce the inspection procedure duration. The electromagnetic phenomena are calculated by using 3D finite element method (FEM) based on the electromagnetic AV-A formulation. Then, the sensor responses are analyzed through polar diagrams of the impedance variation. The circular arrayed sensor is used to characterize a unidirectional CFRP and to detect the in-plane fiber waviness in a layer of CFRP.
机译:本文提出了一种圆形阵列涡流无损检测传感器,用于检测单向碳纤维增强聚合物(CFRP)中的纤维取向和面内波纹度缺陷。设计过程包括两个步骤,将旋转矩形传感器原理应用于一对线圈。在这种情况下,为了测试所使用的仿真方法,将对结果进行实验验证。在第二步中,利用生成的表格来模拟圆形阵列传感器。该传感器允许取消常规传感器的机械旋转,并且可以减少检查过程的持续时间。基于电磁AV-A公式,使用3D有限元方法(FEM)计算电磁现象。然后,通过阻抗变化的极坐标图分析传感器的响应。圆形阵列传感器用于表征单向CFRP并检测CFRP层中的面内光纤波纹度。

著录项

  • 来源
    《NDT & E international》 |2017年第12期|30-37|共8页
  • 作者单位

    Laboratoire d'Electrotechnique de Constantine, Université des frères Mentouri Constantine, Constantine, Algeria,IREENALab, IUT de Saint Nazaire, Université de Nantes, 37 bd de l'Université, BP406, St-Nazaire, France,Inductics-Net: Réseau Thématique de Recherche en Inductique de la DGRSDT et l'ATRST, Algeria;

    IREENALab, IUT de Saint Nazaire, Université de Nantes, 37 bd de l'Université, BP406, St-Nazaire, France,Inductics-Net: Réseau Thématique de Recherche en Inductique de la DGRSDT et l'ATRST, Algeria;

    Laboratoire d'Electrotechnique de Constantine, Université des frères Mentouri Constantine, Constantine, Algeria,Inductics-Net: Réseau Thématique de Recherche en Inductique de la DGRSDT et l'ATRST, Algeria;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Carbon fiber reinforced polymer; Fiber deformation; Finite element method; Non-destructive testing;

    机译:碳纤维增强聚合物;纤维变形;有限元法;非破坏性测试;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号