Modeling and analysis of process parameters on metal removal rate (MRR) in machining of aluminium titanium diboride (Al-TiB_2) composite

摘要

Purpose - The purpose of this paper is to develop a mathematical model for optimizing the metal removal rate (MRR) through Response Surface Methodology (RSM). The developed model helps us to analyze the influence of individual input machining parameters (cutting speed, feed rate, weight percentage) on the responses in machining of Al-TiB_2 composite. Design/methodology/approach - RSM is used to optimize the MRR by developing a mathematical model. Three factors, three-level box Behnken design matrix in RSM is employed to carry out the experimental investigation. The "Design Expert 8.0" software is used for regression and graphical analysis of the data are collected. The optimum values of the selected variables are obtained by solving the regression equation and by analyzing the response surface contour plots. Analysis of variance (ANOVA) is applied to check the validity of the model and for finding the significant parameters. Findings - The response surface model developed, helps to calculate the MRR at different input cutting parameters with the chosen range with more than 95 per cent confidence intervals. Originality/value - The effect of machining parameters on MRR during machining of Al-TiB_2 composites using RSM has not been previously analyzed.