...
首页> 外文期刊>IEEE microwave and wireless components letters >High-Speed mm-Wave Data-Link Based on Hollow Plastic Cable and CMOS Transceiver
【24h】

High-Speed mm-Wave Data-Link Based on Hollow Plastic Cable and CMOS Transceiver

机译:基于空心塑料电缆和CMOS收发器的高速毫米波数据链路

获取原文
获取原文并翻译 | 示例

摘要

A multi-Giga-bit/s (up to 6 Gbps) and energy-efficient ( $<$1 pJ/bit/m) data link is formed by using hollow plastic cable and CMOS transceivers for short distance ($<$8 m) digital communications. The demonstrated link couples/de-couples 60 GHz carried digital signals with roughly 6 dB loss per coupling into/from a hollow plastic cable made of relatively low-loss ($sim$ 1.5 dB/m) Teflon, which is widely used for various home appliances. The CMOS transceivers are designed and implemented in 65 nm Foundry CMOS to support the intended 60 GHz operation with 28 mW power consumption under a 1 V supply.
机译:通过使用中空塑料电缆和短距离($ <$ 800万)CMOS收发器形成多千兆位(s / s)(最高6 Gbps)和高能效($ <$ 1 pJ / bit / m)数据链路通讯。演示的链路耦合/去耦合60 GHz传输数字信号,每次耦合进/出由相对低损耗(sim $ 1.5 dB / m)的特氟龙制成的空心塑料电缆时,大约有6 dB的损耗,该电缆被广泛用于各种家用电器。 CMOS收发器采用65 nm Foundry CMOS设计和实现,以支持预期的60 GHz工作,在1 V电源下的功耗为28 mW。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号