首页> 外文期刊>Microelectronics journal >A SiGe LC-ladder low noise amplifier with base resistance match, gain and noise flatness for UWB applications
【24h】

A SiGe LC-ladder low noise amplifier with base resistance match, gain and noise flatness for UWB applications

机译:具有基本电阻匹配,增益和噪声平坦度的SiGe LC梯形低噪声放大器,适用于UWB应用

获取原文
获取原文并翻译 | 示例
           

摘要

This study presents a 3.1-10.6 GHz ultra-wideband low noise amplifier (UWB LNA) in 0.18 μm SiGe HBT technology. To achieve a good input match, parasitic base resistance in a bipolar transistor and an LC-ladder filter are included into calculations with the common-emitter topology using shunt-shunt capacitive feedback. Both high and flat power gain (S_(21)) and low and flat noise figure (NF) are achieved by adjusting the pole and zero in amplifying stage and quality factors of the fourth-order input network. Design equations for performances such as gain, noise figure and linearity IIP3 are derived especially on gain flatness and noise flatness. LNA dissipates 33 mW power and achieves S_(21) of 20.65+0.7 dB, NF of 2.79 + 0.2 dB over the band of 3.1-10.6 GHz. The simulated input third-order intermodulation point (IIP3) is -17 dBm at 10 GHz.
机译:这项研究提出了一种采用0.18μmSiGe HBT技术的3.1-10.6 GHz超宽带低噪声放大器(UWB LNA)。为了获得良好的输入匹配,在使用共分流电容反馈的共射极拓扑计算中,将双极型晶体管和LC梯形滤波器中的寄生基极电阻包括在内。高和平坦功率增益(S_(21))和低和平坦噪声系数(NF)都是通过在四阶输入网络的放大级和品质因数中调整极点和零来实现的。专门针对增益平坦度和噪声平坦度推导了诸如增益,噪声系数和线性度IIP3之类的性能设计方程。 LNA耗散了33 mW的功率,在3.1-10.6 GHz的频带上实现了20.65 + 0.7 dB的S_(21),2.79 + 0.2 dB的NF。在10 GHz时,模拟的输入三阶互调点(IIP3)为-17 dBm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号