首页> 外文期刊>Mechanical systems and signal processing >Self-adaptive bearing fault diagnosis based on permutation entropy and manifold-based dynamic time warping
【24h】

Self-adaptive bearing fault diagnosis based on permutation entropy and manifold-based dynamic time warping

机译:基于置换熵和基于流形的动态时间规整的自适应轴承故障诊断

获取原文
获取原文并翻译 | 示例
           

摘要

To make bearing fault diagnosis more systematic and effective with better operability and real-time capability, this study proposes an approach using permutation entropy and manifold-based dynamic time warping. First, the nonlinear and non-stationary vibration signals were decomposed into several mono-components by a self-adaptive time-frequency analysis method, such as empirical mode decomposition (EMD), local mean decomposition (LMD), and local characteristic-scale decomposition (LCD). Second, for each component, the permutation entropy (PE), which can reflect the data complexity with good robustness and fast computing ability, was calculated to act as the fault feature. Third, we propose a method called manifold-based dynamic time warping (MDTW), which was used to reasonably measure the similarity between the testing data and the template data. The proposed MDTW is a modified version of the classical dynamic time warping (DTW) algorithm by replacing Euclidean distance based similarity metric with manifold based similarity metric. To determine the optimal feature extraction scheme, EMD-PE, LMD-PE, and LCD-PE based schemes are compared in terms of both adaptability for variable working conditions and separability for different fault severities. Finally, a comparison among DTW, MDTW, and standardized DTW was conducted in terms of similarity measurement. Experimental results demonstrate that the proposed approach can effectively diagnose bearing faults under both variable working conditions and different fault severities. (C) 2016 Elsevier Ltd. All rights reserved.
机译:为了使轴承故障诊断更加系统和有效,并具有更好的可操作性和实时性,本研究提出了一种使用置换熵和基于流形的动态时间规整的方法。首先,通过自适应时频分析方法将非线性和非平稳振动信号分解为几个单分量,例如经验模态分解(EMD),局部均值分解(LMD)和局部特征尺度分解。 (LCD)。其次,针对每个组件,计算出能够反映数据复杂性,具有良好的鲁棒性和快速计算能力的置换熵(PE)充当故障特征。第三,我们提出了一种称为基于流形的动态时间规整(MDTW)的方法,该方法用于合理地测量测试数据和模板数据之间的相似性。所提出的MDTW是经典动态时间规整(DTW)算法的修改版本,通过将基于欧氏距离的相似性度量替换为基于流形的相似性度量。为了确定最佳的特征提取方案,将基于EMD-PE,LMD-PE和LCD-PE的方案在可变工作条件的适应性和不同故障严重性的可分离性方面进行了比较。最后,在相似性度量方面对DTW,MDTW和标准化DTW进行了比较。实验结果表明,该方法可以有效地诊断出在可变工作条件和不同故障严重性下的轴承故障。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号