首页> 外文期刊>Materials Science and Engineering. B, Solid-State Materials for Advanced Technology >Preparation and piezoelectric properties of (K_(0.5)Na_(0.5))NbO_3 lead-free piezoelectric ceramics with pressure-less sintering
【24h】

Preparation and piezoelectric properties of (K_(0.5)Na_(0.5))NbO_3 lead-free piezoelectric ceramics with pressure-less sintering

机译:(K_(0.5)Na_(0.5))NbO_3无铅烧结无铅压电陶瓷的制备及压电性能

获取原文
获取原文并翻译 | 示例
           

摘要

Lead-free piezoelectric ceramics (K_(0.5)Na_(0.5))NbO_3 (abbreviated as KNN) with the relative density of 97.6% have been synthesized by press-less sintering owing to the careful control of processing conditions. The phase structure of KNN ceramics with different sintering temperature and heating rate was analyzed. Results show that the pure perovskite phase with orthorhombic symmetry is in all ceramics specimens. The effect of heating rate and sintering temperature on microstructure and piezoelectric properties of KNN ceramics was investigated. The densification behavior and piezoelectric properties of KNN ceramics were enhanced by improving heating rate and sintering temperature. Pure KNN ceramics sintered at 1120℃ with heating rate of 5℃/min showed optimized densification and piezoelectric properties (ρ = 4.4g/cm~3, d_(33) = 120 pC/N~(-1), K_p = 0.40 and T_c =400℃). The results show that KNN is a promising candidate for lead-free piezoelectric ceramics.
机译:由于对加工条件的精心控制,通过无压烧结法合成了相对密度为97.6%的无铅压电陶瓷(K_(0.5)Na_(0.5))NbO_3(简称KNN)。分析了不同烧结温度和升温速率的KNN陶瓷的相结构。结果表明,在所有陶瓷样品中均具有正交对称的纯钙钛矿相。研究了加热速率和烧结温度对KNN陶瓷微观结构和压电性能的影响。通过提高加热速率和烧结温度,可以提高KNN陶瓷的致密化性能和压电性能。在1120℃,5℃/ min的加热速率下烧结的纯KNN陶瓷表现出最佳的致密化和压电性能(ρ= 4.4g / cm〜3,d_(33)= 120 pC / N〜(-1),K_p = 0.40和T_c = 400℃)。结果表明,KNN是无铅压电陶瓷的有希望的候选者。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号