首页> 外文期刊>Materials Letters >Growth of carbon nanotubes directly on a nickel surface by thermal CVD
【24h】

Growth of carbon nanotubes directly on a nickel surface by thermal CVD

机译:通过热CVD在镍表面上直接生长碳纳米管

获取原文
获取原文并翻译 | 示例
       

摘要

A simple method of growing carbon nanotubes directly on nickel substrate without chemical pretreatment is reported. It is demonstrated that carbon nanotubes growth is directly affected by the roughness on the surface. Carbon nanotubes density is large in each growth zone observed on the surface; these zones being spread sparsely for coarse roughness of the surface. The density of carbon nanotubes decreases and the number of growth zones increases as the roughness on the surface is reduced. The above tend was not affected with C_2H_2 flow time changing from 10 to 2 min. A similar result was obtained using a Ni alloy as substrate, but the effect of surface roughness on the growth of CNTs was less pronounced. The CNTs grown on the Ni alloy were free of amorphous carbon and uniformly distributed.
机译:报道了一种无需化学预处理就可以在镍基底上直接生长碳纳米管的简单方法。已经证明,碳纳米管的生长直接受到表面粗糙度的影响。在表面上观察到的每个生长区域中,碳纳米管的密度都很大。这些区域稀疏分布,表面粗糙。随着表面粗糙度的降低,碳纳米管的密度降低,并且生长区的数量增加。上述趋势不受C_2H_2流动时间从10分钟更改为2分钟的影响。使用Ni合金作为基底获得了类似的结果,但是表面粗糙度对CNT的生长的影响不太明显。在Ni合金上生长的CNT不含非晶碳,并且分布均匀。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号