Kinetics of oxidation and surface oxide cracking behaviours of weld metal and heat affected-zones of SMA weldment in thermal cyclic environment

摘要

Overheating is the main concern in steam generating system because of the deposition of oxalates on the water side resultant of high-temperature which creates localized spallation/cracking in normally protec-tive oxide scale, leads to catastrophic failures. This research article, therefore, focused on oxidation kinet-ics, oxide cracking of HAZs and weld-metal of Shielded Metal Arc (SMA) weldment in T22 steel after exposure to thermal-cyclic conditions at 900 degrees C in air. Thermogravimetry method was applied to examine the kinetics-of oxidation. The scale thickness on HAZs was merely higher than weld-metal because the formation of higher extent of surface cracks, and non-availability of Cr-in inner-scale as confirmed by EDX, provides the easy diffusion path for ionic-transport. Oxide-scale of these regions of weldment obeys the parabolic-kinetics.(c) 2021 Elsevier B.V. All rights reserved.