...
首页> 外文期刊>Materials & design >Dynamic crushing behavior of 3D closed-cell foams based on Voronoi random model
【24h】

Dynamic crushing behavior of 3D closed-cell foams based on Voronoi random model

机译:基于Voronoi随机模型的3D闭孔泡沫的动态破碎行为

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Dynamic crushing responses of three-dimensional cellular foams are investigated using the Voronoi tessellation technique and the finite element (FE) method. FE models are constructed for such closed-cell foam structures based on Voronoi diagrams. The plateau stress and the densification strain energy are determined using the FE models. The effects of the cell shape irregularity, impact loading, relative density and strain hardening on the deformation mode and the plateau stress are studied. The results indicate that both the plateau stress and the densification strain energy can be improved by increasing the degree of cell shape irregularity. It is also found that the plastic deformation bands appear firstly in the middle of the model based on tetrakaidecahedron at low impact velocities. However, the crushing bands are seen to be randomly distributed in the model based on Voronoi tessellation. At high impact velocities, the "I" shaped deformation mode is clearly observed in all foam structures. Finally, the capacity of foams absorbing energy can be improved by increasing appropriately the degree of cell shape irregularity.
机译:使用Voronoi细分技术和有限元(FE)方法研究了三维多孔泡沫的动态破碎响应。基于Voronoi图为此类闭孔泡沫结构构建了有限元模型。使用FE模型确定平台应力和致密化应变能。研究了晶胞形状不规则,冲击载荷,相对密度和应变硬化对变形模式和平台应力的影响。结果表明,通过增加晶胞形状不规则度,可以同时改善平台应力和致密化应变能。还发现,塑性变形带首先出现在以低速冲击的基于正十二面体的模型中间。但是,在基于Voronoi细分的模型中,破碎带被认为是随机分布的。在高冲击速度下,在所有泡沫结构中均清晰观察到“ I”形变形模式。最后,可以通过适当地增加泡孔形状不规则度来提高泡沫吸收能量的能力。

著录项

  • 来源
    《Materials & design》 |2010年第9期|P.4281-4289|共9页
  • 作者单位

    Institute of Applied Mechanics and Biomedical Engineering, Taiyuan University of Technology, Taiyuan 030024, China The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China;

    rnInstitute of Applied Mechanics and Biomedical Engineering, Taiyuan University of Technology, 79 West Yingze Street, Taiyuan 030024, China;

    rnInstitute of Applied Mechanics and Biomedical Engineering, Taiyuan University of Technology, Taiyuan 030024, China;

    The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    foams; voronoi tessellation; tetrakaidecahedron; dynamic crushing; finite element analysis;

    机译:泡沫;voronoi镶嵌四十二面体;动态破碎有限元分析;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号