...
首页> 外文期刊>Materials & design >The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al-Sc alloys
【24h】

The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al-Sc alloys

机译:添加Sc对铸造Al-Sc合金微观组织和时效行为的影响

获取原文
获取原文并翻译 | 示例

摘要

The grain refinement effect and the ageing behaviour of Al-0.5 wt.% Sc, Al-0.7 wt.% Sc, and Al-1 wt.% Sc alloys are studied on the basis of optic microscopy (OM), scanning electron microscopy (SEM), X-ray dif fraction (XRD) observations and hardness measurements. In Al-Sc alloys the higher grain refinement is observed for Sc contents greater than 0.5 wt.% accompanied by a notorious morphology modification, from coarse columnar grains to a fine perfect equiaxed structure. The as cast structures are characterized by a rich supersaturated solid solution in Sc, that promotes a great age hardening response at 250 ℃ and 300 ℃. The age hardening curves also demonstrate a low overageing kinetics for all the alloys. Although the higher Sc content in solid solution for the alloys with 0.7 and 1 wt.% Sc, the age hardening response of all the Al-Sc alloys remains similar. The direct age hardening response of the as cast Al-0.5 wt.% Sc is shown to be greater than the solutionised and age hardened alloy.
机译:基于光学显微镜(OM),扫描电子显微镜(Al-0.5 wt。%Sc,Al-0.7 wt。%Sc和Al-1 wt。%Sc合金)研究了晶粒细化效果和时效行为SEM),X射线衍射分数(XRD)观察和硬度测量。在Al-Sc合金中,对于Sc含量大于0.5 wt。%的情况,观察到更高的晶粒细化,伴随着臭名昭著的形态变化,从粗大的柱状晶粒到精细的完美等轴结构。铸态组织的特征是Sc中具有丰富的过饱和固溶体,可在250℃和300℃促进较大的时效硬化响应。时效硬化曲线还显示出所有合金的低时效动力学。尽管对于具有0.7和1 wt。%Sc的合金,固溶体中的Sc含量较高,但是所有Al-Sc合金的时效硬化响应仍然相似。铸造的Al-0.5 wt。%Sc的直接时效硬化反应显示出比固溶和时效硬化的合金更大。

著录项

  • 来源
    《Materials & design》 |2012年第12期|p.347-352|共6页
  • 作者单位

    CT2M - Centre for Mechanical and Materials Technologies, Universidade do Minho, Azurem 4800-058, Guimaraes, Portugal;

    CT2M - Centre for Mechanical and Materials Technologies, Universidade do Minho, Azurem 4800-058, Guimaraes, Portugal;

    CT2M - Centre for Mechanical and Materials Technologies, Universidade do Minho, Azurem 4800-058, Guimaraes, Portugal;

    CT2M - Centre for Mechanical and Materials Technologies, Universidade do Minho, Azurem 4800-058, Guimaraes, Portugal;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    aluminium alloys; grain refinement; precipitation strengthening;

    机译:铝合金晶粒细化沉淀强化;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号