...
首页> 外文期刊>Materials Characterization >Effect of Sc and Zr additions on the microstructure and age hardening of an AlMg3MnCr alloy Structure and age hardening of AlMgMnCrScZr
【24h】

Effect of Sc and Zr additions on the microstructure and age hardening of an AlMg3MnCr alloy Structure and age hardening of AlMgMnCrScZr

机译:添加Sc和Zr对AlMg3MnCr合金组织和时效硬化的影响以及AlMgMnCrScZr的时效硬化

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of small additions of Sc and Zr on phase transformations, microstructure and hardening during the ageing of AA5754 alloy was studied. Electrical resistometry and hardness (HV10) measurements were used together with the microstructural study by transmission electron microscopy. A fine dispersion of spherical Al_3(Sc_xZr_(1-x)) particles precipitated after the conventional thermal and mechanical treatment (homogenization 450 deg C/4 h, hot working at 420 deg C and cold working). The decomposition sequence of Al-Mg-Si system was observed, namely, metastable beta"-> metastable beta'-> stable beta phase, after the solutionizing treatment 585 deg C/15 h and following isochronal annealing. Simultaneously, a stable Al_3(Sc_xZr_(1-x)) spherical phase precipitated in cube-to-cube orientation. The pronounced age hardening at 240 deg C is due to the metastable beta" phase precipitation. A combination of Al_3(Sc_xZr_(1-x)) spherical particles and cuboids of stable beta phase lead to another age-hardening peak at 360 deg C.
机译:研究了少量添加Sc和Zr对AA5754合金时效过程中的相变,组织和硬化的影响。电阻率和硬度(HV10)测量与透射电子显微镜的显微结构研究一起使用。在常规热处理和机械处理(均质化450℃/ 4h,420℃热加工和冷加工)后,沉淀出球形Al_3(Sc_xZr_(1-x))颗粒的精细分散体。固溶处理585℃/ 15 h后,经等时退火,观察到Al-Mg-Si体系的分解顺序,即亚稳β“->亚稳β'->稳定β相。同时,得到稳定的Al_3( Sc_xZr_(1-x))球形相在立方到立方方向上析出。240℃时明显的时效硬化归因于亚稳态的β“相析出。 Al_3(Sc_xZr_(1-x))球形颗粒和稳定的β相长方体的组合会在360℃导致另一个时效硬化峰。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号