Separation and determination of colloidal trace metals in seawater by cross- flow ultrafiltration, liquid-liquid extraction and ICP-MS

摘要

In this study, a method was developed for the desalination and pre-concentration of three colloidal trace metals in seawater, namely Cd, Cu and Pb, using diethylammonium diethyldithiocarbamate and ammonium 1-pyrrolidine dithiocarbamate as chelates. Seawater samples were first treated with cross-flow ultrafiltration (CFUF) for the separation of the colloidal matter of different molecular weights, i.e. 1-3 kDa, 3-10 kDa and 10 kDa-0.22 mu m. Then, after acid digestion, the organic chelates and the extracting agent chloroform were added at pH = 3.8. Finally, the organic phase was back extracted, and the target metals in all samples were measured using inductively coupled plasma mass spectrometry (ICP-MS) with low detection limits in the range of 0.13-1.18 pmol L-1. The extraction efficiencies for the three metals were in the range of 92.2%-100.3% with an enrichment factor of 40, and their mass recoveries in the studied colloidal fractions were in the range of 83.1%-103.5%. The developed method has been successfully applied for the analysis of seawater samples collected from the sites off the south coast of North Yellow Sea in Shandong Peninsula, China. For the first time, the distribution of colloidal Cd, Cu and Pb in different molecular weights in this area is reported. The results obtained from real samples demonstrate that the developed method is simple, efficient and convenient for routine analysis with low detection limit.