Effect of autoclaving temperature on calcium silicate-based building products containing clay-brick waste

摘要

The utilisation of fired clay-brick waste is of interest in the manufacture of building products due to both socio-economic and technological reasons. Autoclaving is an established process for manufacturing calcium silicate-based building products that affords rapid strength development. Clay-brick waste represents a source of alternative silica, which is more reactive than conventionally used silica and also contains alumina. This paper presents data on the effect of lowering the autoclaving temperature from commonly practised 180 to 170°C on OPC-quartz blends containing clay-brick fines as direct replacement of quartz at 4.3, 8.6 and 12.9 mass percentages. The hydration products of autoclaved OPC-quartz blends with clay-brick fines were characterised using simultaneous DTA-TG in combination with other methods.