Abstract A non-affine micro-macro approach to strain-crystallizing rubber-like materials
首页> 外文期刊>Journal of the Mechanics and Physics of Solids >A non-affine micro-macro approach to strain-crystallizing rubber-like materials
【24h】

A non-affine micro-macro approach to strain-crystallizing rubber-like materials

机译:一种非仿射微宏方法来使橡胶状材料应变结晶

获取原文
获取原文并翻译 | 示例
       

摘要

AbstractCrystallization can occur in rubber materials at large strains due to a phenomenon called strain-induced crystallization. We propose a multi-scale polymer network model to capture this process in rubber-like materials. At the microscopic scale, we present a chain formulation by studying the thermodynamic behavior of a polymer chain and its crystallization mechanism inside a stretching polymer network. The chain model accounts for the thermodynamics of crystallization and presents a rate-dependent evolution law for crystallization based on the gradient of the free energy with respect to the crystallinity variables to ensures the dissipation is always non-negative. The multiscale framework allows the anisotropic crystallization of rubber which has been observed experimentally. Two different approaches for formulating the orientational distribution of crystallinity are studied. In the first approach, the algorithm tracks the crystallization at a finite number of orientations. In contrast, the continuous distribution describes the crystallization for all polymer chain orientations and describes its evolution with only a few distribution parameters. To connect the deformation of the micro with that of the macro scale, our model combines the recently developed maximal advance path constraint with the principal of minimum average free energy, resulting in a non-affine deformation model for polymer chains. Various aspects of the proposed model are validated by existing experimental results, including the stress response, crystallinity evolution during loading and unloading, crystallinity distribution, and the rotation of the principal crystallization direction. As a case study, we simulate the formation of crystalline regions around a pre-existing notch in a 3D rubber block and we compare the results with experimental data.
机译: 摘要 由于称为应变诱导结晶的现象,在大应变下橡胶材料中可能会发生结晶。我们提出了一种多尺度的聚合物网络模型来捕获类似橡胶的材料中的这一过程。在微观尺度上,我们通过研究聚合物链的热力学行为及其在拉伸聚合物网络内部的结晶机理,提出了一种链配方。链模型考虑了结晶的热力学,并基于自由能相对于结晶度变量的梯度提出了结晶速率的依变演化规律,以确保耗散始终为非负值。多尺度框架允许通过实验观察到的橡胶的各向异性结晶。研究了两种不同的结晶度取向分布公式。在第一种方法中,算法在有限数量的方向上跟踪结晶。相反,连续分布描述了所有聚合物链取向的结晶,并描述了仅具有几个分布参数的演化。为了将微观变形与宏观尺度的变形联系起来,我们的模型将最近开发的最大前进路径约束与最小平均自由能的原理结合在一起,从而形成了聚合物链的非仿射变形模型。现有实验结果验证了所提出模型的各个方面,包括应力响应,装卸过程中的结晶度演变,结晶度分布以及主要结晶方向的旋转。作为案例研究,我们模拟了3D橡胶块中预先存在的缺口周围的结晶区域的形成,并将结果与​​实验数据进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号