New computer geometric modeling approach with filament assembly model for two-ply yarns structures

摘要

This article presents a new computer geometric modelling approach for three-dimensional of two-ply yarn structures with filament assembly model. The geometric of individual filaments in two-ply yarn structures with uncompressed and compressed states were studied. In the uncompressed state the filaments in ply yarns have the form of coaxial double wound helices; we simulate the paths of these filaments in the ply yarns. In the compressed state the transformation of the initial filament distribution from the uncompressed state into the distribution after compression by a transverse force. The ply yarns cross-section uses the concept of virtual locations to simulate the filament distributions. Each cross-section is rotated along the single yarn and the ply yarn length. The curve of each filament in each two successive cross-sections is approximated by NURBS and then each curve is created by sweeping a closed curve along the centerline of the single yarn and ply yarn path. The method described is demonstrated in the uncompressed and compressed state of two-ply yarns by the CAD model using geometric parameters of the double-rove acrylic-fiber yarns. The simulation using this approach can demonstrate more realistic and improved visual simulations of real two-ply yarns.