...
首页> 外文期刊>Journal of structural engineering >Out-of-Plane Seismic Performance and Detailing of Brick Veneer Walls
【24h】

Out-of-Plane Seismic Performance and Detailing of Brick Veneer Walls

机译:砖贴面墙的平面外抗震性能和细节分析

获取原文
获取原文并翻译 | 示例
           

摘要

The out-of-plane seismic performance of residential brick veneer walls built over wood-frame backup was evaluated as a function of construction detailing. Shake table tests were conducted on a full-scale brick veneer wall panel, with a window opening, representing the gable-end wall of a typical home structure; the structural performance of corrugated sheet metal veneer-to-wood tie connections was also characterized by separate laboratory testing. The wall panel test specimen was prepared following typical construction practice for brick veneer wall systems, in general conformance with current specified prescriptive design and construction requirements. The shake table tests captured the performance of the brick veneer wall system, including interaction and load-sharing between the brick veneer, corrugated sheet metal ties, and wood-frame backup. Detailed three-dimensional finite-element (FE) models were also developed representing the full-scale brick veneer wall panel specimen, including nonlinear inelastic properties for the tie connections. After calibration based on test results, the FE wall panel model effectively captured static and dynamic experimental brick veneer wall behavior at different response levels, up to and including tie damage and even instability/collapse of the wall panel. Parametric studies were then carried out using FE wall panel models to evaluate the effects of certain types and layouts of tie connections, as well as geometric variations in brick veneer wall construction. Overall seismic performance of brick veneer walls was closely related to the individual tie connection deformation limits, especially for damage in tension. The grid spacing of tie connections, as well as tie installation along the edges and in upper regions of the walls, controlled the ultimate behavior of the brick veneer wall panels. Design guides, codes, and current construction practices have been evaluated in light of the overall findings from these experimental and analytical studies.
机译:评估了在木结构支撑上建造的住宅砖墙贴面墙的面外抗震性能,该抗震性能是根据建筑细部进行的评估。振动台测试是在具有窗户开口的全尺寸砖饰面墙板上进行的,代表了典型房屋结构的山墙端墙。瓦楞金属薄板贴面至木连接的结构性能也通过单独的实验室测试来表征。墙板测试样品是按照砖单板墙系统的典型施工方法制备的,通常符合当前指定的规范设计和施工要求。振动台测试记录了砖饰面墙系统的性能,包括砖饰面,波纹金属薄板扎带和木结构支撑之间的相互作用和负载分担。还开发了详细的三维有限元(FE)模型,该模型代表了全尺寸砖饰面墙面板样品,包括用于连接的非线性非弹性特性。根据测试结果进行校准后,FE墙面板模型可以有效捕获静态和动态实验砖饰面在不同响应水平下的行为,直至并包括系结损坏甚至墙面板的不稳定性/塌陷。然后使用有限元墙面板模型进行参数研究,以评估某些类型和连接布局的影响以及砖饰面墙结构的几何变化。砖墙贴面墙的整体抗震性能与各个连接连接的变形极限密切相关,特别是对于拉伸损伤。扎带连接的网格间距以及沿墙的边缘和上部区域的扎带安装控制了砖饰面墙板的最终性能。根据这些实验和分析研究的总体发现,对设计指南,规范和当前的施工实践进行了评估。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号