Using synthetic multi-element standards (SMELS) for calibration and quality control of the irradiation facilities in the BR1 reactor

摘要

The thermal to epithermal neutron flux ratio (f) and the deviation of the epithermal neutron spectrum from the 1/E shape (α) are essential parameters for the correct application of k ₀-standardized neutron activation analysis. Several methods are applied for the determination of f and α. They are based on Cd-covered multi-monitor or on bare-irradiations methods. The recently developed and characterized synthetic multi-element standards (SMELS) were designed as a validation tool for the proper implementation of the k ₀-NAA method in a laboratory. In particular, SMELS Type III contains Au and Zr, thus allowing the direct determination of f and α. It could, therefore, replace the traditional flux monitors. Furthermore, it could be used as a quality control material to monitor the stability of the irradiation facility and the detector. This paper presents the accuracy of the f and α determination and the feasibility of quality control using SMELS for irradiation channel Y4 of the BR1 reactor.