Heterogeneous crystallization and composition dependence of optical parameters in Sn–Sb–Bi–Se chalcogenides

摘要

Bulk samples of Sn₁₀Sb_20−x Bi _x Se₇₀ (0 ≤ x ≤ 8) chalcogenide alloys were prepared by the conventional melt quenching technique. Thin films were prepared on well-cleaned glass substrates by thermal evaporation technique. X-ray diffraction studies revealed that the alloys with x = 0 and 2 at.% of Bi were amorphous, whereas the alloys with x = 4, 6, 8 at.% were crystalline. The crystalline phases are identified as due to the formation of Bi₂Se₃ and BiSe₂ phases. The microstructural and differential scanning calorimetric studies show the presence of these phases. A simple, straight forward procedure suggested by Swanepoel has been used to calculate the optical parameters, refractive index, and extinction coefficient. The optical gap for all the samples has been obtained from the Tauc plots. The variation in optical parameters for different Bi concentration has been explained on the basis of presence of defect states and the change in stoichiometry with the change in Bi concentration.