首页> 外文期刊>Journal of Lightwave Technology >Delivery of digital video and other multimedia services (<1 Gb/s bandwidth) in passband above the 155 Mb/s baseband services on a FTTx full service access network
【24h】

Delivery of digital video and other multimedia services (<1 Gb/s bandwidth) in passband above the 155 Mb/s baseband services on a FTTx full service access network

机译:在FTTx完整服务访问网络上以高于155 Mb / s基带服务的通带形式交付数字视频和其他多媒体服务(带宽<1 Gb / s)

获取原文
获取原文并翻译 | 示例
           

摘要

For low cost passive optical access networks (PON), we have studied the downstream delivery of an additional <1 Gb/s in the passband above the 155 Mb/s baseband services. Both signals are transmitted on the same fiber using a single transmitter and a single receiver within the power budgets of ITU-T G983. Although our study has used broadcast DSS digital video services for the passband that delivers about 1.2 Gb/s, the passband bandwidth can be used for any broadcast or switched multimedia services, i.e., digital video, data, and audio. For switched services, the baseband upstream will be the return path. Furthermore, the passband can be used to provide a dedicated bandwidth to any subscriber. The passband approach offers a graceful upgrade of a 155 Mb/s baseband system, and is compatible with baseband only optical network unit (ONU). We multiplexed a 155.52 Mb/s baseband signal with quadrature phase shift keying (QPSK) modulated passband digital video channels in the 270-1450 MHz range with minimal degradation. We used an additional 860 MHz carrier modulated with 8 Mb/s using QPSK as a passband test-signal. An optical-to-electrical (O/E) receiver using a PIN diode satisfies the need for class B operation as defined in ITU-T G983 (-28 dBm receiver sensitivity for a 10/sup -10/ bit error rate) with /spl sim/1.5 dBo/sup 1/ margin if we consider the proposed technique as an upgrade of the baseband 155 Mb/s to 622 Mb/s. Otherwise it only meets the specifications of class B (-30 dBm receiver sensitivity). However, an APD based receiver satisfies the power budget needs of ITU-T G983 class C operation (-33 dBm receiver sensitivity) with /spl sim/5.5 dBo margin for both baseband and passband with forward error correction (7/8 convolution and (96,110) Reed-Solomon coding). The available optical power margin with an APD receiver may be large enough that it can also allow use of 16-QAM in place of QPSK in class C mode or 64 QAM in class B mode.
机译:对于低成本无源光接入网络(PON),我们已经研究了在155 Mb / s以上的基带服务中的通带中,附加的<1 Gb / s的下行传输。在ITU-T G983的功率预算范围内,使用单个发射机和单个接收机在同一根光纤上传输两个信号。尽管我们的研究已将广播DSS数字视频服务用于可提供约1.2 Gb / s的通带,但通带带宽可用于任何广播或交换式多媒体服务,即数字视频,数据和音频。对于交换服务,上游的基带将是返回路径。此外,通带可用于向任何用户提供专用带宽。通带方法可优雅地升级155 Mb / s的基带系统,并且与仅基带的光网络单元(ONU)兼容。我们在一个270-1450 MHz范围内将一个155.52 Mb / s的基带信号与正交相移键控(QPSK)调制的通带数字视频通道进行了复用,且降级最小。我们使用QPSK作为通带测试信号,使用了附加的860 MHz载波,其调制速度为8 Mb / s。使用PIN二极管的光电(O / E)接收器可满足ITU-T G983(在10 / sup -10 /误码率下为-28 dBm接收器灵敏度)定义的B级操作需求,其中/如果我们将建议的技术视为将基带155 Mb / s升级到622 Mb / s的方法,则为spl sim / 1.5 dBo / sup 1 /余量。否则,它仅符合B类的规范(-30 dBm的接收器灵敏度)。但是,基于APD的接收器可满足ITU-T G983 C类操作(-33 dBm接收器灵敏度)的功率预算需求,对于基带和通带均具有/ spl sim / 5.5 dBo余量,并且具有前向纠错功能(7/8卷积和( 96,110)Reed-Solomon编码)。 APD接收器的可用光功率裕度可能足够大,以致于它也可以允许在C类模式下使用16-QAM代替QPSK,或者在B类模式下使用64-QAM。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号