首页> 外文期刊>Journal of Hazardous Materials >Optimization of the preconcentration system of cadmium with 1(2-thiazolylazo)-p-cresol using a knotted reactor and flame atomic absorption spectrometric detection
【24h】

Optimization of the preconcentration system of cadmium with 1(2-thiazolylazo)-p-cresol using a knotted reactor and flame atomic absorption spectrometric detection

机译:打结反应器-火焰原子吸收光谱法检测1(2-噻唑基偶氮)-对甲酚对镉的富集系统的优化

获取原文
获取原文并翻译 | 示例
       

摘要

The present paper proposes an on-line preconcentration procedure for cadmium determination in drinking water samples. It is based on the precipitation of cadmium(Ⅱ) ions on a knotted reactor (KR) using 1(2-thiazolylazo)-p-cresol (TAC) as complexing reagent. The optimization step was performed using a full factorial design involving the variables: pH, eluent concentration (nitric acid) and TAC concentration. The results of this experiment demonstrated that these variables at chosen levels are not statistically significant. Under optimized experimental established conditions, analytical parameters for the preconcentration method were: a detection limit of 40.0 ng/1, precision as relative standard deviation (RSD) of 1.2 and 1.0%, for cadmium concentration of 2.5 and 20.0 μg/l, respectively. The preconcentration factor considering the slopes of the analytical curves with and without preconcentration is 23 for a sample volume of 10 ml. This system shows a sampling frequency of 25 h~(-1). In order to check the accuracy, the standard reference material, NIST SRM 1643d trace elements in water was analyzed. A comparison, using t-test demonstrates that there is not significant difference among the achieved results with proposed method and the certified values. The addition/recovery experiments in the samples analyzed demonstrated the accuracy and applicability of the system developed for cadmium determination in water samples.
机译:本文提出了一种在线预浓缩程序,用于饮用水样品中的镉测定。该方法基于使用1(2-噻唑基偶氮)-对甲酚(TAC)作为络合剂在打结反应器(KR)上沉积镉(Ⅱ)离子。使用包括以下变量的全因子设计来执行优化步骤:pH,洗脱液浓度(硝酸)和TAC浓度。该实验的结果表明,这些选定水平的变量在统计学上不显着。在优化的实验条件下,预浓缩方法的分析参数为:镉的浓度分别为2.5和20.0μg/ l时,检出限为40.0 ng / 1,相对标准偏差(RSD)的精密度为1.2和1.0%。考虑到有和没有预浓缩的分析曲线的斜率,对于10 ml的样品,预浓缩因子为23。该系统的采样频率为25 h〜(-1)。为了检查准确性,分析了标准参考材料NIST SRM 1643d在水中的痕量元素。使用t检验进行的比较表明,所提出的方法所获得的结果与认证值之间没有显着差异。分析样品中的添加/回收实验证明了开发用于水样中镉测定的系统的准确性和适用性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号