Fatigue performance and evaluation of welded joints in steel truss bridges

摘要

While welded joints are extensively used in the connections of steel truss bridges, service life of the bridges is largely dependent on the fatigue resistance of the welded joints. Stress concentration and weld residual stress are two primary causes of fatigue damage in the welded joints. In this study, corner-fillet profile (CFP) and ultrasonic impact treatment (UIT) are used to improve the fatigue performance of the welded joints through relieving stress concentration and weld residual stresses, respectively. The fatigue resistance of welded joints is evaluated through experimentation. The results indicate that the use of CFP and/or UIT can alter the initiation location of fatigue crack. The fatigue resistance of welded joints was increased by 24% and 36% by using the CFP and UIT, respectively. The fatigue performance of welded joints was evaluated using three different methods, including the nominal stress method, effective notch stress method, and peak stress method. The peak stress method with a single fatigue resistance curve demonstrated the highest applicability and accuracy. (C) 2018 Elsevier Ltd. All rights reserved.