Development of Powered Resonance-Tube Actuators for Aircraft Flow Control Applications

摘要

The present paper addresses both active-flow-control actuator technology development and the demonstration of the effectiveness of actuators that could be easily integrated into practical aircraft applications. The actuator used is an adaptation of the Hartmann oscillator. Demonstration experiments that illustrate the effectiveness of this actuator include cavity tone suppression at transonic speeds and the reduction of jet-impingement tones. The actuator concept is based on a high-speed jet aimed at the mouth of a cylindrical tube closed at the other end. The result is a high-amplitude self-sustaining fluctuating field accompanied by an intense narrowband tone, all in the region between the supply jet and the resonance tube. Using unsteady pressure sensors and flow visualization, we explored the effect of varying actuator parameters such as the spacing between the power jet and the resonance tube, supply pressure, resonance-tube depth, diameter, shape, and lateral spacing. By vary ing the depth of the tube, the frequency could be varied from about 1.6 kHz to over 10 kHz and amplitudes as high as 156 dB (microphone location dependent) were obtained in the vicinity of actuation. To integrate this concept into practical aircraft applications, two generations of a more complex version of this device known as the powered resonance-tube bank (PRTB) were developed and demonstrated. Results indicate that by using high-frequency excitation at 5-kHz suppression levels in excess of 20 dB were consistently obtained over a range of operating conditions in both cavity and impingement flow situations. Based on our results, we have grounds to believe that a properly designed PRTB has significant advantages over conventional actuators such as acoustic, piezo, and oscillatory microstructures.