首页> 外文期刊>Journal of Advanced Transportation >Discrete Train Speed Profile Optimization for Urban Rail Transit: A Data-Driven Model and Integrated Algorithms Based on Machine Learning
【24h】

Discrete Train Speed Profile Optimization for Urban Rail Transit: A Data-Driven Model and Integrated Algorithms Based on Machine Learning

机译:城市轨道交通的离散列车速度概况优化:基于机器学习的数据驱动模型和集成算法

获取原文
获取原文并翻译 | 示例
           

摘要

Energy-efficient train speed profile optimization problem in urban rail transit systems has attracted much attention in recent years because of the requirement of reducing operation cost and protecting the environment. Traditional methods on this problem mainly focused on formulating kinematical equations to derive the speed profile and calculate the energy consumption, which caused the possible errors due to some assumptions used in the empirical equations. To fill this gap, according to the actual speed and energy data collected from the real-world urban rail system, this paper proposes a data-driven model and integrated heuristic algorithm based on machine learning to determine the optimal speed profile with minimum energy consumption. Firstly, a data-driven optimization model (DDOM) is proposed to describe the relationship between energy consumption and discrete speed profile processed from actual data. Then, two typical machine learning algorithms, random forest regression (RFR) algorithm and support vector machine regression (SVR) algorithm, are used to identify the importance degree of velocity in the different positions of profile and calculate the traction energy consumption. Results show that the calculation average error is less than 0.1 kwh, and the energy consumption can be reduced by about 2.84% in a case study of Beijing Changping Line.
机译:近年来,城市轨道交通系统中的节能列车速度概况优化问题由于要求降低运营成本和保护环境而引起了很多关注。关于该问题的传统方法主要集中在配制出型速度轮廓和计算能耗,这导致可能的误差导致可能的误差是由于经验方程中使用的一些假设。为了填补这种差距,根据现实世界城市铁路系统收集的实际速度和能量数据,本文提出了一种基于机器学习的数据驱动模型和集成启发式算法,以确定最小能耗的最佳速度曲线。首先,提出了一种数据驱动优化模型(DDom)来描述从实际数据处理的能量消耗和离散速度分布之间的关系。然后,两个典型的机器学习算法,随机森林回归(RFR)算法和支持向量机回归(SVR)算法用于识别轮廓不同位置的速度的重要性,并计算牵引能量消耗。结果表明,计算平均误差小于0.1千瓦时,在北京昌平线的案例研究中,能源消耗可以减少约2.84%。

著录项

  • 来源
    《Journal of Advanced Transportation》 |2019年第3期|7258986.1-7258986.17|共17页
  • 作者单位

    Beijing Jiaotong Univ State Key Lab Rail Traff Control & Safety Beijing 100044 Peoples R China|Beijing Jiaotong Univ Minist Transport Key Lab Transport Ind Big Data Applicat Technol C Beijing 100044 Peoples R China|Beijing Jiaotong Univ Sch Traff & Transportat Beijing 100044 Peoples R China;

    Beijing Jiaotong Univ State Key Lab Rail Traff Control & Safety Beijing 100044 Peoples R China|Beijing Jiaotong Univ Minist Transport Key Lab Transport Ind Big Data Applicat Technol C Beijing 100044 Peoples R China;

    Beijing Jiaotong Univ State Key Lab Rail Traff Control & Safety Beijing 100044 Peoples R China;

    Beijing Jiaotong Univ State Key Lab Rail Traff Control & Safety Beijing 100044 Peoples R China|Beijing Jiaotong Univ Minist Transport Key Lab Transport Ind Big Data Applicat Technol C Beijing 100044 Peoples R China;

    Hasselt Univ Transportat Res Inst IMOB Wetenschapspk 5 Bus 6 B-3590 Diepenbeek Belgium;

    Beijing Jiaotong Univ Sch Traff & Transportat Beijing 100044 Peoples R China|Beijing Transport Inst Beijing 100073 Peoples R China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号